Two-Way Articulating Video Borescope

Two-Way Articulating Video Borescope

Skip to product information
Two-Way Articulating Video Borescope
  • Two-Way Articulating Video Borescope
Two-Way Articulating Video Borescope
SKU:

Two-Way Articulating Video Borescope

Get personalized pricing for your specific requirements

Two-Way Articulating Video Borescope - QualiScope™ T

The QualiScope™ T two-way articulating video borescope bends its camera tip up and down across a 180° range, letting operators guide the lens through bores, welds, and pipes from a single access point. It comes with a choice of two probe sizes, 6.2 mm and 8.5 mm, which accommodate different opening sizes and image resolutions. Rotating the probe brings features outside the steering plane into view. A 4.3-inch IPS display presents the live image, while photos and video are saved to a TF card as the inspection proceeds. High-lumen LEDs at the tip illuminate dark cavities.

The QualiScope™ T is offered in two configurations: a screen version for direct handheld use, and a mobile version that streams to phones, diagnostic tools, and computers. The two-way design keeps controls straightforward and the tool lightweight, making it well suited to routine checks where the operator mostly needs to look up and down. The IP67-rated lens resists dust and water immersion, and a high-temperature alarm powers the unit down above 90°C to safeguard its electronics. A 2,600 mAh battery delivers roughly four hours of operation per charge.

Welders, mechanics, and quality inspectors rely on the QualiScope™ T for quick visual checks that would otherwise require taking equipment apart. A steering life rated at 20,000 cycles and a metal-and-plastic snake tube available in lengths up to 5 m make it a good fit for repeated use in the shop and in the field. The two-way format handles a large portion of everyday inspection work at a lower cost than four-way or 360° joystick scopes.

Two-Way Articulating Video Borescope - QualiScope™ T Applications

The two-way articulating video borescope supports routine remote visual inspection wherever an operator needs to see inside a component along a mostly straight path.

  • Welding Inspection: examines the internal weld root, penetration, and surface finish inside pipes, tubes, and vessels, with the camera traveling straight down the joint
  • Automotive and Engine Service: views cylinder walls, valves, and combustion chambers through spark-plug and injector ports to check for wear, deposits, and scoring
  • Pipe, Tube, and Duct Inspection: surveys interior surfaces for corrosion, blockages, and debris, steering up and down while probe rotation covers the remaining directions
  • HVAC and Facilities Maintenance: inspects ducts, coils, and wall cavities for damage, moisture, and obstructions
  • Manufacturing and Assembly QC: verifies the internal cleanliness and finish of machined parts, castings, and bores before the next process step
  • Machinery and Equipment Maintenance: finds wear, foreign objects, and damage inside gearboxes, pumps, and housings during scheduled service
  • General-Purpose Field Inspection: enables fast visual checks in maintenance and repair work where a full four-way scope offers more capability than the job requires

Standards

The two-way articulating video borescope holds international regulatory certifications covering safety, electromagnetic compatibility, and restricted substances. The source documentation lists no ISO or ASTM test-method standards, so the marks below reflect product compliance rather than a particular inspection procedure.

  • CE Marking: conformity with the applicable European Union directives on health, safety, and environmental protection
  • FCC: compliance with United States Federal Communications Commission limits on electromagnetic interference
  • RoHS: Restriction of Hazardous Substances, which limits specified hazardous materials in electrical and electronic equipment

Two-Way Articulating Video Borescope - QualiScope™ T Key Features

This two-way articulating video borescope combines practical inspection capabilities in a portable unit with a built-in screen.

  • Two-Way 180° Steering: up-and-down tip control directs the camera along bores and welds, while probe rotation provides the perpendicular view
  • Two Probe Sizes: a 6.2 mm probe at 1280 × 720 and an 8.5 mm probe at 1920 × 1080 let users match opening size and image detail to the task
  • 4.3-Inch IPS Screen: a wide-angle IPS panel delivers sharp images with stable color for direct handheld use
  • Mobile and Screen Versions: the screen model operates independently, while the mobile model streams to phones, diagnostic tools, and computers
  • IP67 Waterproof Tip: the lens and probe withstand dust and water immersion in wet and dirty environments
  • High-Lumen Adjustable LEDs: six or ten tip-mounted LEDs with brightness control illuminate dark cavities and help manage glare
  • High-Temperature Alarm and Auto Shutdown: an on-screen temperature readout and automatic shutdown above 90°C protect the probe
  • 20,000-Cycle Steering Life: a durable bending section and metal-and-plastic snake tube stand up to repeated use
  • Customizable Tube Length to 5 m: standard 1, 2, and 3 m options, plus longer custom lengths, match reach to the target
  • TF Card Storage and Playback: photo capture, video recording, image rotation, and on-device playback keep inspection records on-site
  • Multi-Language Menu: an English-first interface with nine additional languages and clear button labels keeps operation simple
  • CE, FCC, and RoHS Compliant: regulatory certifications covering safety, electromagnetic compatibility, and restricted substances

Theory and Method

Two-way articulation steers the camera within a single plane. One opposing pair of control wires runs through the insertion tube to a bending section behind the lens. Moving the control tightens one wire and releases the other, so the tip bends up or down toward the target across a 180° range. To reach a feature outside that plane, the operator rotates the probe and steers again. This single-plane approach relies on a simpler mechanism than four-way or 360° joystick systems.

Image capture starts at a digital sensor behind the lens, and the probe size determines the resolution and field of view. The 6.2 mm version delivers 1280 × 720 resolution across a 90° view, while the 8.5 mm version delivers 1920 × 1080 across an 80° view. Both achieve their best focus between 20 and 100 mm. High-lumen LEDs provide illumination, with six on the 6.2 mm probe and ten on the 8.5 mm probe, and brightness control helps manage glare.

Single-plane steering fits a large share of inspection work. When a bore, weld, or duct runs mostly straight, the operator looks up and down far more often than side to side, and probe rotation covers the rest. The result is a lightweight tool with direct controls that shortens training time and speeds up routine checks, backed by an IP67 tip that tolerates dust and wet conditions.

Two-Way Articulating Video Borescope - QualiScope™ T Technical Specifications

Specifications by Probe Version

Parameter QualiScope™ T6 QualiScope™ T8
Lens / Probe Diameter Ø6.2 × 16 mm Ø8.5 × 11.5 mm
Camera Resolution 1280 × 720 1920 × 1080
Field of View 90° (±3°) 80°
Tip Illumination 6 high-brightness LEDs 10 high-brightness LEDs

Shared Specifications

Parameter Specification
Steering Two-way (up / down), single plane
Steering Angle 180°
Steering Radius 32 mm
Steering Life ≥20,000 cycles
Depth of Field / Best Focus 20 to 100 mm
Display 4.3-inch IPS (480 × 272)
Snake Tube Material Metal and plastic
Snake Tube Length 1 m to 5 m (1 / 2 / 3 m standard, customizable)
Illumination High-lumen LED beads, adjustable brightness
Waterproof Rating (Lens / Probe) IP67
High-Temperature Protection On-screen temperature display; automatic shutdown above 90°C
Operating Temperature -10°C to 50°C
Relative Humidity <90%
Power Supply 2,600 mAh lithium battery
Charging DC 5V / 1A (8.14 Wh)
Working Time About 4 hours
Storage TF card
Menu Languages English plus 9 others (Japanese, Korean, French, German, Italian, Spanish, Russian, Polish, Chinese)
Functions Photo capture, video recording, playback, image rotation, camera rotation, LED adjustment, temperature display, over-temperature warning
Versions Screen (direct use) and Mobile (phones, diagnostic devices, computers)
Certifications CE, FCC, RoHS

Package Contents

Two-Way Articulating Video Borescope

Item Description
Main Unit Main handheld borescope unit
Operation Instructions Printed user manual
Charging Line USB charging cable
Cleaning Cloth Lens and screen cloth
Product Guarantee Card Guarantee documentation
Warranty Card Warranty documentation

The 1, 2, and 3 m tube versions ship in a protective plastic case; the 5 m version ships in a carry handbag.

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks. If you require these items urgently please contact us to check accurate stock availability and to organize faster shipping methods.

🚚

Important Delivery Information

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.

Need it urgently? Contact us here to check stock and organize faster shipping.

Orders:
Purchaser acknowledges that when placing an order on the Qualitest:

A. the placing of the order signifies the purchaser's assent to place said order at the Qualitest and that the order will be accepted by the successful processing of the order by Qualitest USA LC.
B. the purchaser typing their name when requested to do so by the Qualitest constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Qualitest.
D. A minimum handling fee will be applied to the shipping total for all orders.

Shipping within the U.S.A.:

All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims.

Shipping outside of the U.S.A.:

All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.

Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.

Partial shipment: Qualitest USA reserves the right to make partial shipments unless otherwise instructed by the purchaser.

Payment terms: All payments to Qualitest USA are to be made in U.S. Dollars (USD)

A. Credit Card - Qualitest USA will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Qualitest USA reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Qualitest and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Qualitest USA reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:

their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.

Return Policy:

Qualitest USA may accept return of purchased merchandise within North America for refund or credit under the following conditions -

  • There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
  • Goods must be returned to Qualitest USA within 5 days of the date of the receipt of the purchased goods.
  • All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
  • Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
  • Purchaser has confirmed return authorization directly with Qualitest.
  • Merchandise is regular catalog item. Special order items can not be returned.
  • All returned merchandise is subject to inspection by Qualitest. Qualitest reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Qualitest does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Qualitest. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.


Change of Terms:

The acceptance of any order by Qualitest USA is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Qualitest. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Qualitest USA in writing.

Complete Agreement:

The terms and conditions in the Qualitest web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Qualitest USA LC.

Information:

Qualitest USA makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Qualitest USA reserves the right to change product information, including pricing information at any time without notice. 

Trademarks and Copyrights:

The WorldofTest.com Qualitest contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Qualitest without the express written consent of Qualitest International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Qualitest USA and may not be used without the express written permission of Qualitest USA. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks. 

Warranty Disclaimer:

No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Qualitest USA. Qualitest USA disclaims any and all liability for product defect claims. Qualitest USA does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Qualitest USA honors the product warranty as published and made available by Qualitest USA. Warranty claims for products not manufactured by Qualitest are the responsibility of the manufacturer. Qualitest USA will always make its best good faith effort to resolve warranty claims. 


Force Majeure:

Qualitest USA shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Qualitest USA in the conduct of its business. 

Qualitest USA Privacy Policy 

I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)? 

1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data. 

2. Personal data

Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs. 

II. What security measures are used to protect personal data? What are the user's options for processing personal data? 

3. Technical measures

Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request. 

It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies. 

III. What data is communicated to third parties and for what purposes? 

4. Communication of personal data

Personal data entrusted to us by you is not communicated, leased or sold to third parties. 

IV. Which department answers questions about the processing of personal data? 

5. Contact

In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Qualitest USA.

Disclaimer of liability Qualitest USA shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Qualitest web site or its links with other web sites, even if Qualitest USA has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Qualitest USA web site. In addition, Qualitest USA guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Qualitest and WorldofTest.com web site may be amended at any time without prior notice. In particular, Qualitest USA shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Qualitest USA be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Qualitest and WorldofTest.com web site, the user may under certain circumstances leave the Qualitest web site. Qualitest USA assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites. 

Related Products