Automatic Glow Wire Tester (GWIT and GWFI)

Automatic Glow Wire Tester (GWIT and GWFI)

Skip to product information
Automatic Glow Wire Tester (GWIT and GWFI)
  • Automatic Glow Wire Tester (GWIT and GWFI)
Automatic Glow Wire Tester (GWIT and GWFI)
SKU:

Automatic Glow Wire Tester (GWIT and GWFI)

The QualiFlame™ GWT-A is a high-performance automatic glow wire tester designed for precision flammability and ignition simulation. Engineered for electronics, appliances, and polymer R&D, it delivers fully automated GWIT and GWFI testing up to 1050°C without compromising on operator safety or global standard compliance.
  • Up To 1050°C Temperature
  • Precise 0.95 N Force
  • 7.0 Mm Penetration Depth
  • Up To 170 A Current

Get personalized pricing for your specific requirements

Automatic Glow Wire Tester (GWIT and GWFI) - QualiFlame™ GWT-A

Computer-Controlled Glow Wire Test Apparatus for Ignition Temperature and Flammability Index Testing

The QualiFlame™ GWT-A Automatic Glow Wire Tester is designed to determine the Glow-Wire Ignition Temperature (GWIT) and Glow-Wire Flammability Index (GWFI) of solid insulating materials, engineering plastics, and finished electrical components. It simulates the thermal stress that can occur when an overloaded resistor or malfunctioning heating element exposes polymer materials to elevated temperatures under fault conditions.

The system heats a nickel-chromium glow wire loop to a selectable temperature from 550°C to 1050°C, maintains the selected temperature for one minute, and then brings the glow wire into contact with the test specimen under controlled force. This controlled procedure supports consistent evaluation of ignition and flammability characteristics.

Automated Testing and Data Analysis

A built-in microcomputer controls the test sequence and generates temperature-time and current-time curves during testing. The QualiFlame™ GWT-A automatically records key test parameters, including ignition time, flame extinction time, and ignition of the tissue layer caused by flaming droplets. Automated timing helps reduce measurement inconsistencies associated with manual stopwatch-based glow wire testing.

Test results and curves can be stored, reviewed, and exported through a single operating interface. The integrated test chamber features a cast construction and extraction system that helps remove combustion products from the testing area during operation.

Applications

The QualiFlame™ GWT-A Glow Wire Test Apparatus is suitable for applications across:

  • Electrical and electronic component testing

  • Electrical appliance manufacturing

  • Engineering plastic evaluation

  • New-energy material development

  • Polymer material screening

  • Finished product qualification

  • Third-party testing and certification laboratories

Optional features such as robotic specimen handling, barcode traceability, and cloud connectivity can support automated batch testing and laboratory data management.

Qualitest provides the GWT-A Automatic Glow Wire Tester with calibration accessories and application support for testing laboratories across North America.

Automatic Glow Wire Tester (GWIT and GWFI) - QualiFlame™ GWT-A Applications

The QualiFlame™ GWT-A Automatic Glow Wire Tester supports laboratories evaluating whether materials and electrical components can resist ignition when exposed to localized overheating. Its controlled temperature range, applied force, and test procedure make it suitable for glow-wire testing programs focused on material flammability and ignition performance.

  • Electrical and Electronic Components: Evaluates connectors, switches, relay housings, terminal blocks, and printed circuit board substrates positioned near current-carrying components.

  • Household Appliance Manufacturing: Tests enclosures, control panels, and internal structural components against glow-wire requirements specified in appliance safety programs.

  • Engineering Plastics and Compounding: Supports the evaluation of flame-retardant formulations during material development, allowing comparison of additive systems based on GWFI and GWIT performance.

  • Wire and Cable Insulation: Evaluates insulation and jacketing compounds for resistance to ignition caused by contact with an adjacent heated or glowing element.

  • New Energy and Battery Materials: Screens separator films, battery module housings, and busbar insulation used in battery packs and energy storage systems.

  • Composite and Laminate Materials: Tests glass-reinforced laminates, structural composites, and coated substrates where resin composition influences ignition and flammability characteristics.

  • Automotive Electrical Systems: Evaluates fuse boxes, wiring harness supports, and electronic housings exposed to localized heat within automotive electrical systems.

  • Certification and Third-Party Laboratories: Generates traceable GWIT and GWFI test records to support compliance documentation, type approval, and customer audit requirements.

Standards

The QualiFlame™ GWT-A Glow Wire Tester is designed for glow-wire testing procedures referenced by product safety programs for insulating materials and electrical products. Controlled test parameters, including glow-wire geometry, applied force, penetration depth, and calibration procedures, support testing in accordance with applicable standards.

  • IEC 60695-2-10 - Fire Hazard Testing, Part 2-10: Glowing/Hot-Wire Based Test Methods, Glow-Wire Apparatus and Common Test Procedure

  • IEC 60695-2-13 - Fire Hazard Testing, Part 2-13: Glowing/Hot-Wire Based Test Methods, Glow-Wire Ignition Temperature (GWIT) Test Method for Materials

  • UL 746A - Standard for Polymeric Materials, Short Term Property Evaluations

Automatic Glow Wire Tester (GWIT and GWFI) - QualiFlame™ GWT-A Key Features

The QualiFlame™ GWT-A Automatic Glow Wire Tester combines a robust, sealed test chamber with an advanced computer-controlled system for precise temperature regulation, test timing, data acquisition, and reporting. Its modular construction and configurable software support reliable glow-wire testing across a range of laboratory applications.

Key Features

  • Integral Cast Test Chamber: A corrosion-resistant, coated, single-piece enclosure houses the glow-wire loop, carriage, and specimen in fixed alignment. This construction helps maintain consistent test geometry during repeated high-temperature testing.

  • Layered Modular Design: Separate levels accommodate the control system, test assembly, and flue-gas extraction components. This layout provides convenient service access while minimizing disruption to the calibrated testing area.

  • Concealed Check-Valve Extraction System: An electric check-valve exhaust system provides adjustable airflow from 0 to 2 m³/min at a noise level of 55 dB or less. Anti-backflow efficiency exceeding 99% helps prevent smoke from returning to the laboratory.

  • x86 Computer-Controlled Platform: A 2.6 GHz processor, 8 GB RAM, and a 256 GB SSD, expandable to 2 TB, support local operation of the testing software and storage of extended test campaigns.

  • Dual Gigabit Ethernet Connectivity: Two Ethernet ports with transmission speeds of up to 1000 Mbps and IEEE 1588 Precision Time Protocol support facilitate laboratory network integration and synchronized data management.

  • Real-Time Curve Acquisition: Temperature-time and current-time curves are displayed as testing progresses. Stored curves remain accessible for online analysis and raw-data review.

  • Configurable Test Reporting: Users can edit test schemes, create customized report templates, and save, export, or print test results. The system supports storage of 100 or more test records.

  • Multi-Point Software Calibration: Linear correction across multiple temperature and current measurement points helps improve measurement accuracy without requiring hardware adjustments.

  • 7 mm Penetration Depth Control: A dedicated penetration limiter supports testing of both flat and curved specimens while maintaining consistent glow-wire contact depth across different sample shapes.

  • ASTM B115 Calibration Probe: An oxygen-free copper sensor probe supports stable thermal response during instrument verification and calibration checks.

  • Adjustable Test Timing: Software controls allow adjustment of the heating period, specimen contact duration, and data-recording windows, supporting a variety of glow-wire testing procedures.

Theory and Method

Glow-wire testing simulates a localized overheating event in which an internal electrical component reaches high temperatures and the surrounding polymer material is exposed to a glowing heat source. The QualiFlame™ GWT-A reproduces this condition using a U-shaped nickel-chromium loop containing approximately 77% nickel and 20% chromium, with a 4.00 mm diameter and current capacity of up to 170 A.

Resistive heating brings the glow wire to the required test temperature. A Type K sheathed thermocouple positioned at the wire tip provides temperature feedback for closed-loop control, maintaining the selected temperature within ±2°C. Silver foil calibration provides a physical temperature reference for verifying thermocouple positioning, with pure silver melting at 961.8°C.

After the glow wire reaches the selected temperature and remains stable for one minute, the specimen carriage moves horizontally at 18 ±3 mm/s until the specimen contacts the glow wire under a force of 0.95 N. A mechanical penetration stop limits contact depth to 7.0 mm, helping maintain consistent test geometry across different specimen materials and shapes.

During contact, heat transfers from the glow wire into the specimen surface. As the polymer reaches its decomposition temperature, volatile products are released and mix with surrounding air. Depending on the material's thermal and flammability characteristics, these gases may ignite or disperse without sustained combustion.

The instrument automatically records the ignition time and, following the standard 30-second contact period, measures flame extinction time. It also monitors the tissue layer beneath the specimen for ignition caused by flaming droplets.

GWFI and GWIT Determination

The two primary glow-wire indices evaluate different aspects of material behavior:

  • Glow-Wire Flammability Index (GWFI): Determines the highest test temperature at which the specimen either does not ignite or self-extinguishes within 30 seconds after glow-wire removal, without burning through the specimen or igniting the tissue layer underneath.

  • Glow-Wire Ignition Temperature (GWIT): Determines the highest temperature at which three specimens do not ignite. The reported GWIT is then 25 K above the highest temperature at which ignition does not occur, or 30 K above that temperature when the value exceeds 900°C.

Automated current regulation, temperature control, timing, and test-curve acquisition help improve repeatability between operators and across testing cycles. The resulting data provides a consistent basis for evaluating the ignition and flammability behavior of polymeric insulating materials and electrical components.

Automatic Glow Wire Tester (GWIT and GWFI) - QualiFlame™ GWT-A Technical Specifications

Parameter Specification
Model QualiFlame™ GWT-A
Test Temperature Room temperature to 1050°C, ±2°C, continuously adjustable
Hot Period Duration 0 to 9999.9 s, ±0.1 s, continuously adjustable
Ignition Time Recording 0 to 9999.9 s, ±0.1 s, circuit-controlled
Fall Time Recording 0 to 9999.9 s, ±0.1 s circuit-controlled
Penetration (Browning) Depth 7.0 mm ±0.5 mm
Test Advance Speed 18 ±3 mm/s
Applied Force 0.95 ±0.1 N
Glow Wire Material Nickel-chromium alloy (Ni 77%, Cr 20%), Ø4.00 mm ±0.07 mm
Glow Wire Shape U-shaped loop, horizontal and stationary
Thermocouple Type K, sheathed (armored), Ø1 mm
Calibration Method Silver foil, 960°C ±10°C
Heating Current 0 to 170 A, continuously adjustable
Test Chamber Volume Greater than 0.5 m³
Smoke Extraction Ø100 mm duct (standard); adjustable air velocity 0 to 2 m/s (optional)
Control Platform x86 architecture, 2.6 GHz, 8 GB RAM, 256 GB SSD (expandable to 2 TB)
Data Interface Dual gigabit Ethernet, up to 1000 Mbps, IEEE 1588 support
Test Record Storage 100 or more test datasets
Overall Dimensions 1340 mm (W) × 720 mm (D) × 1060 mm (H)
Weight Approximately 150 kg
Recommended Bench Size 1500 mm (L) × 1000 mm (W) × 700 mm (H)
Wall Clearance 200 mm minimum recommended
Voltage 220 V ±10%, 50 Hz, 500 VA (110V is also available)

Listed values are standard product specifications. Customized configurations follow the contract and technical agreement.

Optional Configurations

Item Description
High-Definition Process Recording 1080p at 60 fps low-light HDR camera that records and stores the full test sequence, with real-time retrieval for editing and archiving
Voice Interaction System Customizable voice announcement module that reports test status aloud during operation
IoT Cloud Platform 4G/5G network module for remote monitoring, program download, status tracking, alarm notification, and parameter adjustment, with Modbus and TCP integration into MES and other plant systems
Automated Testing System Six-axis robotic arm with ±0.025 mm repeat positioning that handles sample pickup, delivery, placement, clamping, testing, data recording, and waste retrieval; one arm can serve two testers over a bus network
Sample Traceability System Barcode scanning that captures material, batch, and test scheme data and links the record from sample submission through testing to report generation
Upgraded Exhaust System Constant-speed fan with adjustable air velocity for laboratories that need higher extraction capacity

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks. If you require these items urgently please contact us to check accurate stock availability and to organize faster shipping methods.

🚚

Important Delivery Information

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.

Need it urgently? Contact us here to check stock and organize faster shipping.

Orders:
Purchaser acknowledges that when placing an order on the Qualitest:

A. the placing of the order signifies the purchaser's assent to place said order at the Qualitest and that the order will be accepted by the successful processing of the order by Qualitest USA LC.
B. the purchaser typing their name when requested to do so by the Qualitest constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Qualitest.
D. A minimum handling fee will be applied to the shipping total for all orders.

Shipping within the U.S.A.:

All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims.

Shipping outside of the U.S.A.:

All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.

Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.

Partial shipment: Qualitest USA reserves the right to make partial shipments unless otherwise instructed by the purchaser.

Payment terms: All payments to Qualitest USA are to be made in U.S. Dollars (USD)

A. Credit Card - Qualitest USA will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Qualitest USA reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Qualitest and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Qualitest USA reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:

their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.

Return Policy:

Qualitest USA may accept return of purchased merchandise within North America for refund or credit under the following conditions -

  • There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
  • Goods must be returned to Qualitest USA within 5 days of the date of the receipt of the purchased goods.
  • All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
  • Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
  • Purchaser has confirmed return authorization directly with Qualitest.
  • Merchandise is regular catalog item. Special order items can not be returned.
  • All returned merchandise is subject to inspection by Qualitest. Qualitest reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Qualitest does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Qualitest. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.


Change of Terms:

The acceptance of any order by Qualitest USA is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Qualitest. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Qualitest USA in writing.

Complete Agreement:

The terms and conditions in the Qualitest web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Qualitest USA LC.

Information:

Qualitest USA makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Qualitest USA reserves the right to change product information, including pricing information at any time without notice. 

Trademarks and Copyrights:

The WorldofTest.com Qualitest contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Qualitest without the express written consent of Qualitest International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Qualitest USA and may not be used without the express written permission of Qualitest USA. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks. 

Warranty Disclaimer:

No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Qualitest USA. Qualitest USA disclaims any and all liability for product defect claims. Qualitest USA does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Qualitest USA honors the product warranty as published and made available by Qualitest USA. Warranty claims for products not manufactured by Qualitest are the responsibility of the manufacturer. Qualitest USA will always make its best good faith effort to resolve warranty claims. 


Force Majeure:

Qualitest USA shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Qualitest USA in the conduct of its business. 

Qualitest USA Privacy Policy 

I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)? 

1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data. 

2. Personal data

Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs. 

II. What security measures are used to protect personal data? What are the user's options for processing personal data? 

3. Technical measures

Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request. 

It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies. 

III. What data is communicated to third parties and for what purposes? 

4. Communication of personal data

Personal data entrusted to us by you is not communicated, leased or sold to third parties. 

IV. Which department answers questions about the processing of personal data? 

5. Contact

In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Qualitest USA.

Disclaimer of liability Qualitest USA shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Qualitest web site or its links with other web sites, even if Qualitest USA has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Qualitest USA web site. In addition, Qualitest USA guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Qualitest and WorldofTest.com web site may be amended at any time without prior notice. In particular, Qualitest USA shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Qualitest USA be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Qualitest and WorldofTest.com web site, the user may under certain circumstances leave the Qualitest web site. Qualitest USA assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites. 

Related Products