Needle Flame Tester

Needle Flame Tester

Skip to product information
Needle Flame Tester
SKU:

Needle Flame Tester

Get personalized pricing for your specific requirements

Needle Flame Tester – QualiFlame™ NFT

Needle Flame Test Apparatus for Fire Hazard Testing

The QualiFlame™ NFT is designed to determine how electrical components and insulating materials behave when exposed to a localized flame caused by an electrical fault. It generates a controlled 12 mm flame using a stainless steel burner with a 0.5 mm bore, supplied with propane or butane. The tester is suitable for manufacturers of lighting equipment, low-voltage switchgear, household appliances, electric motors, power tools, and electronic instruments. It also supports testing activities in research facilities, manufacturing environments, and quality control laboratories. An integrated PLC system and touchscreen interface manage the testing process.

Testing is conducted in accordance with the needle-flame procedure specified in IEC 60695-11-5. The burner offers three positioning angles: 0°, 20°, and 45°, allowing the flame to contact the specimen in the orientation required by the applicable product standard. Flame exposure can be programmed from 0 s to 999.9 s, with increments of 0.1 s. Although the equipment supports this full timing range, a 30-second exposure is commonly specified by product standards. Afterflame duration is captured automatically, while the operator can also stop the measurement manually when necessary.

Before specimen testing, burner performance is checked using a Cu-ETP copper block and a 0.5 mm Type K thermocouple. The calibration procedure requires the copper block to reach the specified temperature rise within 23.5 seconds, providing confirmation that the flame meets the required thermal output. A test chamber with an internal volume greater than 0.5 m³ supplies the draught-free environment required by the method. The system operates with commercially available bottled lighter gas containing at least 95% propane or butane, eliminating the need for a dedicated specialty gas supply.

Needle Flame Tester – QualiFlame™ NFT Applications

The QualiFlame™ NFT supports fire hazard assessments across electrical product manufacturing, material development, and laboratory inspection. It helps determine whether components and insulating materials can withstand localized flame exposure under the conditions specified by relevant safety requirements.

  • Lighting Products and Luminaires: Examines lamp holders, driver enclosures, and insulating supports to determine their response when an internal electrical fault produces a flame.

  • Low-Voltage Switchgear and Controlgear: Assesses protective barriers, arc chutes, and molded enclosures used in circuit breakers, contactors, and electrical distribution assemblies.

  • Household Appliance Manufacturing: Evaluates internal plastic parts and wiring supports against needle-flame requirements referenced in appliance safety standards.

  • Electric Motors and Rotating Machines: Investigates the flame resistance of slot liners, terminal boxes, and winding insulation systems under potential electrical fault conditions.

  • Power Tools and Portable Equipment: Tests handle materials, switch housings, and internal supporting components that may encounter flames resulting from motor or contact faults.

  • Electrical and Electronic Instruments: Examines enclosure materials and internal insulation used in measuring, monitoring, and control equipment.

  • Electrical Connectors and Terminal Blocks: Determines how insulating housings perform when positioned close to locations where electrical arcing may occur.

  • Printed Circuit Board Assembly: Assesses circuit board substrates and component supports to establish their susceptibility to flame propagation following a localized fault.

  • Insulating Materials and Engineering Plastics: Compares different material formulations during development and incoming material quality inspections.

Standards

The QualiFlame™ NFT supports testing in accordance with established requirements for needle-flame apparatus configuration, flame characteristics, and fire hazard evaluation.

  • IEC 60695-11-5: Fire Hazard Testing, Part 11-5: Test Flames, Needle-Flame Test Method, Apparatus, Confirmatory Test Arrangement and Guidance.

  • UL 746A: Standard for Polymeric Materials, Short Term Property Evaluations.

Needle Flame Tester – QualiFlame™ NFT Key Features

The QualiFlame™ NFT is built to control the conditions that influence needle-flame test results, from burner positioning and exposure duration to flame verification and temperature measurement.

  • Programmable PLC-Based Operation: A PLC controller coordinates the testing sequence through a touchscreen interface, managing flame application and timing to minimize variations caused by manual operation.

  • Three Burner Positioning Angles: The burner can be positioned at 0°, 20°, or 45°, allowing laboratories to reproduce the flame orientation specified for different product evaluations.

  • Precision Stainless Steel Burner: A corrosion-resistant stainless steel burner with a 0.5 mm bore produces the needle flame required by the test method while maintaining the specified burner geometry.

  • Flexible Flame Exposure Programming: Operators can set exposure periods anywhere from 0 s to 999.9 s, with 0.1 s resolution. This accommodates the commonly specified 30-second test as well as longer exposure requirements.

  • Integrated Afterflame Monitoring: The instrument automatically measures and records how long a specimen continues burning after flame removal. A manual stop function gives operators additional control when the end of a burning event requires judgment.

  • 12 mm Flame Height Verification: A dedicated measurement gauge allows operators to check flame height before testing, helping ensure that every specimen receives the prescribed flame exposure.

  • Thermal Output Verification with Copper Block: The supplied Cu-ETP copper block provides a measurable reference for checking burner performance. Its specified temperature rise must occur within 23.5 seconds to confirm that the flame meets the required thermal conditions.

  • Armored Type K Thermocouple: The 0.5 mm thermocouple withstands temperatures up to 1100°C and provides rapid temperature response during timed burner calibration.

  • Standard Bottled Gas Operation: The burner accepts commercially available propane or butane with a minimum purity of 95%, allowing laboratories to operate without installing a dedicated specialty gas supply.

  • Integrated Draught-Free Test Chamber: With an internal volume exceeding 0.5 m³, the chamber provides the space required for needle-flame testing under draught-free conditions without an additional enclosure.

  • Temperature Measurement from 0°C to 1000°C: The instrument covers a broad measurement range for burner calibration and specimen temperature monitoring, eliminating the need for a separate temperature measurement instrument for these tasks.

  • English Interface with Language Options: The standard English-language display is suitable for North American laboratory operations, while alternative language configurations can be provided upon request.

  • Adaptable Electrical Configuration: The power supply can be customized to accommodate local mains requirements when the standard 220 V configuration is unsuitable.

Theory and Method

The needle-flame test examines how materials respond when a localized fire originates from an electrical fault within equipment. Such an event may begin at an arcing electrical contact or when insulation catches fire. The assessment focuses on whether the initial flame remains confined to the affected area or causes nearby components to ignite and sustain further burning. Unlike glow wire testing, which simulates excessive heating before ignition occurs, the needle-flame method introduces an actual flame with controlled dimensions and thermal characteristics to evaluate the specimen's response.

The test flame is generated by a needle burner featuring a 0.5 mm bore and supplied with propane or butane. Once correctly adjusted, the burner produces a diffusion flame with a height of 12 mm. Maintaining this specified height is essential because variations in flame dimensions affect the amount of heat transferred to the specimen. The supplied flame-height gauge is therefore used to check the burner before each test series. The burner can also be positioned at different angles to reproduce the required flame contact conditions. For example, a 45° orientation creates a different pattern of heat exposure across the specimen surface compared with a vertically applied flame.

Burner heat output is verified using a drilled Cu-ETP copper block weighing 0.58 g, together with a 0.5 mm Type K thermocouple. Under the specified flame conditions, the copper block must achieve the required temperature rise within 23.5 seconds. Meeting this time requirement confirms that the burner delivers the prescribed thermal energy and gives the laboratory measurable calibration evidence rather than relying solely on visual flame assessment.

Once flame verification is complete, the specimen is exposed for the duration required by the applicable testing standard, typically 30 seconds. The evaluation then considers how long the specimen continues burning after the flame is removed, whether fire spreads across the material, and whether burning particles or other material ignite the specified material positioned beneath the specimen.

Needle Flame Tester - QualiFlame™ NFT Technical Specifications

Parameter Specification
Model QualiFlame™ NFT
Needle Burner Ø0.5 mm ±0.1 mm inner bore, ≥9 mm outer diameter, ≥35 mm length, stainless steel
Burner Angle 0°, 20°, 45° (flame height adjustable)
Thermocouple Ø0.5 mm Type K (Ni/Cr-Ni/Al), armored sheath rated to 1100°C
Flame Application Time 0 s to 999.9 s ±0.1 s, adjustable (30 s typical)
Afterflame Timing 0 s to 999.9 s ±0.1 s, automatic recording with manual timeout
Flame Height 12 mm ±1 mm (measurement gauge supplied)
Flame Gas Propane or butane, 95% minimum purity (bottled lighter gas acceptable)
Temperature Measurement Range 0°C to 1000°C
Flame Temperature Rise Requirement 100°C ±2°C to 700°C ±3°C in 23.5 s ±1 s
Calibration Copper Block Ø4 mm ±0.01 mm, 0.58 g ±0.01 g before drilling, Cu-ETP
Test Process Automatic control, independent test cycle
Chamber Volume ≥0.5 m³
Controller PLC with integrated touch interface
Dimensions (L × W × H) 1100 × 740 × 1250 mm
Voltage 220 V, 48 Hz to 60 Hz, 800 VA (110V is also available)
Display Panel Language English (other languages available on request)

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks. If you require these items urgently please contact us to check accurate stock availability and to organize faster shipping methods.

🚚

Important Delivery Information

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.

Need it urgently? Contact us here to check stock and organize faster shipping.

Orders:
Purchaser acknowledges that when placing an order on the Qualitest:

A. the placing of the order signifies the purchaser's assent to place said order at the Qualitest and that the order will be accepted by the successful processing of the order by Qualitest USA LC.
B. the purchaser typing their name when requested to do so by the Qualitest constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Qualitest.
D. A minimum handling fee will be applied to the shipping total for all orders.

Shipping within the U.S.A.:

All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims.

Shipping outside of the U.S.A.:

All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.

Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.

Partial shipment: Qualitest USA reserves the right to make partial shipments unless otherwise instructed by the purchaser.

Payment terms: All payments to Qualitest USA are to be made in U.S. Dollars (USD)

A. Credit Card - Qualitest USA will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Qualitest USA reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Qualitest and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Qualitest USA reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:

their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.

Return Policy:

Qualitest USA may accept return of purchased merchandise within North America for refund or credit under the following conditions -

  • There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
  • Goods must be returned to Qualitest USA within 5 days of the date of the receipt of the purchased goods.
  • All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
  • Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
  • Purchaser has confirmed return authorization directly with Qualitest.
  • Merchandise is regular catalog item. Special order items can not be returned.
  • All returned merchandise is subject to inspection by Qualitest. Qualitest reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Qualitest does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Qualitest. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.


Change of Terms:

The acceptance of any order by Qualitest USA is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Qualitest. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Qualitest USA in writing.

Complete Agreement:

The terms and conditions in the Qualitest web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Qualitest USA LC.

Information:

Qualitest USA makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Qualitest USA reserves the right to change product information, including pricing information at any time without notice. 

Trademarks and Copyrights:

The WorldofTest.com Qualitest contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Qualitest without the express written consent of Qualitest International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Qualitest USA and may not be used without the express written permission of Qualitest USA. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks. 

Warranty Disclaimer:

No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Qualitest USA. Qualitest USA disclaims any and all liability for product defect claims. Qualitest USA does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Qualitest USA honors the product warranty as published and made available by Qualitest USA. Warranty claims for products not manufactured by Qualitest are the responsibility of the manufacturer. Qualitest USA will always make its best good faith effort to resolve warranty claims. 


Force Majeure:

Qualitest USA shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Qualitest USA in the conduct of its business. 

Qualitest USA Privacy Policy 

I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)? 

1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data. 

2. Personal data

Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs. 

II. What security measures are used to protect personal data? What are the user's options for processing personal data? 

3. Technical measures

Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request. 

It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies. 

III. What data is communicated to third parties and for what purposes? 

4. Communication of personal data

Personal data entrusted to us by you is not communicated, leased or sold to third parties. 

IV. Which department answers questions about the processing of personal data? 

5. Contact

In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Qualitest USA.

Disclaimer of liability Qualitest USA shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Qualitest web site or its links with other web sites, even if Qualitest USA has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Qualitest USA web site. In addition, Qualitest USA guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Qualitest and WorldofTest.com web site may be amended at any time without prior notice. In particular, Qualitest USA shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Qualitest USA be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Qualitest and WorldofTest.com web site, the user may under certain circumstances leave the Qualitest web site. Qualitest USA assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites. 

Related Products