Fast Dual Analysis Ferrograph

Fast Dual Analysis Ferrograph

Skip to product information
Fast Dual Analysis Ferrograph
  • Fast Dual Analysis Ferrograph
Fast Dual Analysis Ferrograph
SKU:

Fast Dual Analysis Ferrograph

The QualiFG™ 3000 is a high-performance dual-channel ferrograph designed for precision wear debris analysis. Engineered for transportation and heavy industry R&D, it delivers professional-grade ferrogram preparation within a rapid, high-throughput footprint without compromising on magnetic field strength or international standard compliance.
  • Simultaneous 2 Channel Synchronous Preparation
  • Strong 1.8 T Magnetic Flux Density
  • Rapid Under 20 Minute Cycle Time
  • Broad 0 To 800μm Particle Range

Get personalized pricing for your specific requirements

Fast Dual Analysis Ferrograph – QualiFG™ 3000

The Fast Dual Analysis Ferrograph QualiFG™ 3000 is a dual-channel ferrograph system engineered for preparing ferrograms from in-service lubricating and hydraulic oils to support microscopy-based wear particle analysis. It generates two ferrograms simultaneously, enabling laboratories to increase sample throughput while ensuring uniform particle deposition for reliable comparison, assessment, and diagnostic consistency.

The system utilizes a high-gradient magnetic field, controlled flow dynamics, and automated sample handling to deliver repeatable ferrogram preparation with reduced operator input and improved analytical consistency.

The QualiFG™ 3000 is designed for oil analysis laboratories, condition monitoring programs, and maintenance teams that require efficient and rapid wear debris evaluation. It is suitable for use in transportation, steel and heavy industries, electric power generation, and marine or defense gearbox applications, where detailed wear particle morphology analysis provides deeper maintenance insights beyond basic concentration-based screening.

Fast Dual Analysis Ferrograph – QualiFG™ 3000 Applications

Transportation and heavy fleet operations:
The QualiFG™ 3000 is widely used for condition monitoring of locomotives, trucks, and off-highway machinery. Through analytical ferrography, it supports early detection of abnormal wear in bearings, gear systems, pumps, and other lubricated components, helping maintenance teams address issues before they impact operational uptime.

Iron and steel industry:
This ferrograph system is well-suited for heavy industrial assets such as fan assemblies, gear drives, and hydraulic systems. Ferrograph analysis enables clear separation of abrasive particles, fatigue debris, and contamination, allowing analysts to link particle morphology with underlying wear mechanisms for more accurate diagnostics.

Electric power sector:
The QualiFG™ 3000 is also used in generator systems and auxiliary equipment where lubrication health directly affects reliability. Ferrographic output helps confirm wear severity when vibration trends, temperature changes, or oil condition indicators begin to show deviation from normal operating patterns.

Marine and defense drivetrain systems:
This instrument is applicable for transmission gearboxes and propulsion-related systems where early-stage wear detection is critical for maintaining uptime and operational readiness. The dual-channel configuration supports parallel sample preparation, enabling comparative evaluation and verification across similar assets for more confident analysis outcomes.

Standards

The QualiFG™ 3000 is designed in alignment with widely recognized international standards and practices for analytical ferrography and wear particle characterization in oil analysis programs:

  • ASTM D7690 — Standard practice for the microscopic characterization of particles from in-service lubricants using analytical ferrography. This standard defines procedures for preparing and examining ferrograms for wear debris analysis.

  • ASTM D7684 — A supporting guide that establishes consistent terminology and a structured framework for classifying and describing particle morphology in microscopic oil analysis. It is commonly used alongside ASTM D7690 and related sample preparation methods.

  • SH/T 0573 — A widely adopted analytical ferrography method used in oil analysis laboratories for wear particle examination and condition monitoring applications.

These standards support consistent ferrogram preparation, interpretation, and reporting across condition monitoring and lubricant analysis programs.

Fast Dual Analysis Ferrograph – QualiFG™ 3000 Key Features

Dual-channel synchronous preparation:
The QualiFG™ 3000 is equipped with two independent channels, allowing simultaneous production of two ferrograms in a single analytical cycle. This increases laboratory throughput and supports easier side-by-side evaluation of reference and suspect samples for improved diagnostic comparison.

Automated operation with minimal manual handling:
After sample loading, the system carries out the ferrogram preparation process automatically. This reduces manual intervention and allows operators to concentrate on microscopy evaluation and reporting tasks, making it well-suited for routine oil analysis workflows.

High-gradient permanent magnetic field:
The system is based on a permanent magnet configuration that generates a high-gradient magnetic field. As specified, it delivers a maximum magnetic flux density of 1.8 T ±0.1 T, with a magnetic field gradient greater than 0.5 T/mm. This design supports controlled particle deposition and helps minimize particle stacking during ferrogram formation. (All magnetic specifications should be verified against the final approved factory datasheet prior to publication or use in formal documentation.)

Fast Dual Analysis Ferrograph

Adjustable sample flow:
The oil sample transport rate can be adjusted between 10 and 30 mL/h, supporting stable deposition conditions and improved repeatability. The cleaning agent flow is also adjustable, with a maximum flow rate of more than 100 mL/h, allowing flexibility across different sample conditions.

Fast preparation cycle:
The system can typically produce two ferrograms in under 20 minutes. This short cycle time supports efficient laboratory workflows and helps maintain consistent sample processing in routine oil analysis programs.

Clear ferrogram track for improved diagnosis:
The ferrogram deposition track is designed to remain clear and transparent, enabling easier differentiation of metallic, organic, and non-metallic particles during microscopic examination. The structured particle arrangement supports faster and more effective interpretation.

Reduced particle stacking:
Controlled deposition conditions help minimize particle accumulation and stacking, resulting in cleaner ferrograms that are easier to analyze under microscopy.

Integrated waste handling system:
The QualiFG™ 3000 includes a built-in waste collection system. A vacuum pump transfers waste liquid into a dedicated container, helping reduce exposure to volatile organic vapors and improving laboratory safety.

Low sensitivity to moisture in oil samples:
The system is largely unaffected by moisture content in oil samples, ensuring reliable ferrogram preparation even when working with routine field-collected lubricating oil samples.

Fast Dual Analysis Ferrograph

Theory and Method

A ferrograph operates by directing an oil sample across a ferrographic substrate placed within a controlled magnetic field. Ferrous particles are strongly attracted and align along the magnetic gradient, while non-ferrous particles and other contaminants deposit based on fluid flow dynamics and natural settling behavior. This process forms a structured deposition track in which larger and more magnetically responsive particles tend to appear earlier along the slide, supporting faster and more organized microscopic evaluation.

Once the ferrogram is prepared, it is examined under an optical microscope for detailed wear particle analysis. Analysts assess particle type, size distribution, surface morphology, and probable wear mechanisms to interpret equipment condition. The transparent nature of the deposition track enhances visual separation of metallic, organic, and non-metallic debris, while the ordered particle arrangement based on magnetic response and size helps improve the efficiency and accuracy of classification during microscopy.

Fast Dual Analysis Ferrograph – QualiFG™ 3000 Technical Specification

Parameter QualiFG™ 3000
Product type Fast Dual Analysis Ferrograph
Preparation channels Dual-channel synchronous preparation
Voltage AC 220 V, 50 Hz
Optional voltage 110 V available
Power adapter 12 V power adapter included
Wear particle measurement range 0 to 800 μm
Injection method Micro-pump pressure type, automatic sampling
Cleaning methods Automatic cleaning and manual cleaning
Magnetic field gradient > 0.5 T/mm
Maximum magnetic flux density 1.8 T ±0.1 T
Magnet design Permanent magnet, high-gradient field
Dilution / cleaning solvent Tetrachloroethylene
Plate inclination 1° to 5° adjustable range
Display 10.1-inch LCD touch screen
Oil sample transport Adjustable flow range 10 to 30 mL/h
Cleaning agent flow Adjustable; maximum >100 mL/h
Measurement resolution 1 µm
Sample volume per analysis 1 mL
Oil delivery pipe size OD 2.6 mm, ID 1.8 mm
Ferrographic substrate size 60 × 24 × 0.17 mm
Size (L × W × H) 395 × 355 × 335 mm
Weight About 14 kg
Standards reference ASTM D7690, ASTM D7684

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks. If you require these items urgently please contact us to check accurate stock availability and to organize faster shipping methods.

🚚

Important Delivery Information

Delivery time varies upon stock availability. Our standard dispatch and shipping times are generally within 1 week, however for some high demand items the delivery may be extended to 2-3 weeks.

Need it urgently? Contact us here to check stock and organize faster shipping.

Orders:
Purchaser acknowledges that when placing an order on the Qualitest:

A. the placing of the order signifies the purchaser's assent to place said order at the Qualitest and that the order will be accepted by the successful processing of the order by Qualitest USA LC.
B. the purchaser typing their name when requested to do so by the Qualitest constitutes a signature to contract
C. the purchaser has the full authority to enter into the contract for such entity, and such grant of authority was indicated by purchaser by placement of the order through the Qualitest.
D. A minimum handling fee will be applied to the shipping total for all orders.

Shipping within the U.S.A.:

All orders will be shipped best way prepaid, via courier for smaller packages or via Freight forwarders for larger crates. A handling fee may be applicable to orders. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims.

Shipping outside of the U.S.A.:

All orders will be shipped best way, via courier for smaller packages or via Freight forwarders for larger crates. A low handling fee may be applicable. Title to merchandise transfers to the purchaser upon delivery to the carrier. Loss or damage in transit is the responsibility of the purchaser. Qualitest USA will provide assistance with information needed for processing claims. Export fees, duties, taxes, and customs clearance are the responsibility of the purchaser.

Shipping insurance is not included, please contact our sales representatives if you need shipping insurance.

Partial shipment: Qualitest USA reserves the right to make partial shipments unless otherwise instructed by the purchaser.

Payment terms: All payments to Qualitest USA are to be made in U.S. Dollars (USD)

A. Credit Card - Qualitest USA will accept Visa, Master Card, AMEX or Discover. Required information from the purchaser is the credit card number, 3 digit security code, expiration date, card holder's name (exactly as it appears on the card), billing address, and valid telephone number for us to use in case of difficulty. Qualitest USA reserves the right to delay shipment pending verification of credit card validity.
B. Wire Transfer - Transfer must be made to Qualitest and confirmed for the full purchase amount (merchandise, handling and shipping) prior to shipment. Please contact us by phone at 1.877.884.TEST (8378)(outside U.S. +1.905.944.9825) or by fax at +1.954.697.8211 for bank information.
C. Open Account - Available to U.S.A. and Canadian customers only. Terms on open accounts are Net 30 days from date of shipment. Qualitest USA reserves the right to refuse shipment of new orders if any unpaid invoices are older than 30 days. Purchasers may apply for an open account by providing:

their bank information
3 credit references from other suppliers
Please allow 5 business days for confirmation of credit and creation of an open account.

Return Policy:

Qualitest USA may accept return of purchased merchandise within North America for refund or credit under the following conditions -

  • There may be an additional restocking fee charged to the transaction if items are already shipped to customer.
  • Goods must be returned to Qualitest USA within 5 days of the date of the receipt of the purchased goods.
  • All freight, duties, customs, and other related shipping charges for the returned merchandise are borne by the purchaser. Shipments made freight collect will be refused.
  • Merchandise must be returned properly packaged in brand new, salable condition, along with original packaging and all documentation, accessories and certificates.
  • Purchaser has confirmed return authorization directly with Qualitest.
  • Merchandise is regular catalog item. Special order items can not be returned.
  • All returned merchandise is subject to inspection by Qualitest. Qualitest reserves the right to refuse return of any merchandise that is used, damaged, or not part of the current published price list. In the case Qualitest does not accept the returned merchandise, reasonable attempts will be made to notify the Buyer and the merchandise will be returned to Buyer as they were received by Qualitest. Damaged merchandise that can be restored to original condition and thus accepted for return will be evaluated on an individual basis. The purchaser will be advised of additional expenses for the repair and restoration of the returned item. After approval, these expenses will be charged to the purchaser in addition to the restocking fee.


Change of Terms:

The acceptance of any order by Qualitest USA is subject to purchaser's assent to all of the terms and conditions set forth herein. Purchaser's assent to these terms and conditions shall be presumed from the purchaser's placement of an order through the Qualitest. Any and all other terms and conditions are expressly rejected, and no addition or modification of terms and conditions shall be binding without the prior agreement of Qualitest USA in writing.

Complete Agreement:

The terms and conditions in the Qualitest web site, incorporated herein by reference, including forms, acknowledgements, quotations, invoices and sales terms and conditions constitute the entire and exclusive agreement between the purchaser and Qualitest USA LC.

Information:

Qualitest USA makes every effort to insure the accuracy of the product information displayed on its web sites, but makes no warranties, expressed or implied, as to the accuracy of the data portrayed on the web sites. Qualitest USA reserves the right to change product information, including pricing information at any time without notice. 

Trademarks and Copyrights:

The WorldofTest.com Qualitest contains trademarked product names. Product names are not to be reproduced or used in any fashion by any party other than Qualitest without the express written consent of Qualitest International Inc.. All pictures, descriptions, and other content of this web site are copyrighted by Qualitest USA and may not be used without the express written permission of Qualitest USA. Purchaser acknowledges that they have no right, title, or interest in the trademarks or copyrights in the products, and purchaser covenants that it will take no action to register or otherwise interfere with such rights. Please contact us with any requests for permission or questions about our trademarks. 

Warranty Disclaimer:

No warranty or affirmation of fact, express or implied, other than expressly set forth herein is made or authorized by Qualitest USA. Qualitest USA disclaims any and all liability for product defect claims. Qualitest USA does not express or imply a warranty that any product on the web site(s) is fit for a particular purpose. Qualitest USA honors the product warranty as published and made available by Qualitest USA. Warranty claims for products not manufactured by Qualitest are the responsibility of the manufacturer. Qualitest USA will always make its best good faith effort to resolve warranty claims. 


Force Majeure:

Qualitest USA shall not be liable for any delay in or impairment of performance resulting in whole or in part from Acts of God, service interruptions, labor disruptions, insurrections, governmental decrees or controls, war risks, severe weather, supplies or raw materials, inability to procure or ship products, inability to obtain permits and/or licenses, or any other circumstances or causes beyond the control of Qualitest USA in the conduct of its business. 

Qualitest USA Privacy Policy 

I. What legal provisions govern our data processing practices? How and from where (internal/external sources) is personal data acquired? What are the rights of the user (web site visitor/registered customer)? 

1. General
As a general principle, no personal details need to be provided when visiting our Internet site. Data made available to us by you is treated in strict confidence and in accordance with the provisions of the Federal Data Protection Act. With a few exceptions (see point 2 below), our web server only registers non-personal (anonymous) data concerning the use of our site. Specifically, the log files of our web server, as a general rule, only contain the user's IP address, the last page visited by the user, the browser used, date, time and the file requested. This anonymous data, however, does not permit conclusions to be drawn about the individual users, and merely serves to prepare statistics on the use of our Internet site for the purpose of its improvement. At the same time, great importance is placed on ensuring that usage data is not linked with personal data. 

2. Personal data

Person-related data (personal data) is only used if the newsletter is ordered (by email), product(s) is (are) ordered, or to supply product information. We undertake to use the personal data entrusted to us only for the purposes stated. Purchase history is retained for assistance with future customer needs. 

II. What security measures are used to protect personal data? What are the user's options for processing personal data? 

3. Technical measures

Databases are optimally protected against third party access, loss, misuse and falsification through the use of appropriate technical means. In order to determine the popularity of individual topic areas, cookies are used in those sections. These text files are stored on your hard disk and facilitate your use of our Internet site. Thanks to these cookies, there is no need for specific registration each time you visit a section requiring registration, and we can supply you with the personalized contents you request. 

It is for you to decide whether you want to work with cookies and, if so, which kind (permanently stored on the hard disk or only placed for the time of the browser activity). However, we draw your attention to the fact that access to fields requiring registration is only possible with activated cookies. 

III. What data is communicated to third parties and for what purposes? 

4. Communication of personal data

Personal data entrusted to us by you is not communicated, leased or sold to third parties. 

IV. Which department answers questions about the processing of personal data? 

5. Contact

In the light of the rapid technical developments in connection with the Internet, we make every effort to constantly improve our Internet site and technical precautions, including those connected with data protection. We will keep you suitably informed about such measures. Any changes will be published here. Further information is available at any time by contacting Qualitest USA.

Disclaimer of liability Qualitest USA shall not be liable for direct, indirect or consequential losses resulting from or in connection with access to, use of or queries to the Qualitest web site or its links with other web sites, even if Qualitest USA has previously been informed of the possibility of such losses. No guarantee is provided as to the accuracy of the information disseminated via the Qualitest USA web site. In addition, Qualitest USA guarantees neither the reliability nor the completeness of the information contained on its web site. The information made available on the Qualitest and WorldofTest.com web site may be amended at any time without prior notice. In particular, Qualitest USA shall not be liable for losses caused by transmission errors, technical faults and interruptions, breakdowns or an unlawful interference with the user's data processing system or the generally accessible systems and transmission networks. Nor shall Qualitest USA be liable for losses resulting from breakdowns, interruptions or overloads occurring to any data processing systems. If certain links are activated on the Qualitest and WorldofTest.com web site, the user may under certain circumstances leave the Qualitest web site. Qualitest USA assumes no responsibility for the contents, products or services offered or other information or offers contained on these linked web sites. 

Related Products