Ball Pressure Test Apparatus – QualiHSA™ BPT
The QualiHSA™ BPT Ball Pressure Test Apparatus evaluates the heat resistance of non-metallic materials by pressing a
5 mm steel ball against a heated test specimen under a 20 N load. The resulting indentation indicates how well the
material retains its shape when exposed to elevated temperatures. This method is commonly used by compliance
laboratories to assess electrical equipment enclosures, insulating supports, and other non-metallic components.
Testing takes place inside a heating cabinet maintained at the temperature specified by the applicable product
standard. After the specimen has cooled, the operator measures the indentation. A diameter of no more than 2.0 mm
indicates compliance with the acceptance criterion.
Both the loading assembly and specimen support are manufactured from stainless steel to maintain dimensional
stability during repeated exposure to high test temperatures. The specimen rests on a solid stainless steel cylinder
measuring 50 mm in diameter and 100 mm in length. Its substantial thermal mass helps maintain consistent specimen
temperature throughout the test. The complete applied load, including the weight of the steel ball, is maintained at
20 N ± 0.2 N. Since the QualiHSA™ BPT operates with a separate heating cabinet, laboratories can use an existing
oven rather than requiring a dedicated integrated heating system.
Manufacturers of plugs, sockets, household appliances, luminaires, and IT equipment regularly encounter ball pressure
testing requirements as part of their product safety assessments. Multiple IEC product standards specify this
method, with the required test temperature determined by the particular product and component under evaluation. The
same apparatus can accommodate these different testing programs because the ball dimensions, loading force, and
specimen support configuration remain unchanged. Laboratories only need to adjust the heating cabinet temperature
according to the applicable standard.
Ball Pressure Test Apparatus – QualiHSA™ BPT Applications
The QualiHSA™ BPT is suitable for evaluating non-metallic components used in electrotechnical equipment, including
complete subassemblies and individual parts. It also supports testing of solid electrical insulating materials,
excluding ceramics. Typical test specimens include molded components responsible for supporting electrical
connections, protecting internal assemblies, or maintaining separation between energized conductors.
-
Plugs, Socket-Outlets, and Appliance Couplers: Determines whether housings and insulating
barriers retain their structural integrity under heat exposure, as required by IEC 60884-1 and IEC 60320-1.
-
Household Appliance Manufacturing: Assesses appliance enclosures and terminal blocks to
establish whether elevated temperatures could soften their materials and cause energized components to shift
from their intended positions.
-
Luminaire Production: Evaluates lampholders, driver housings, and insulating spacers at the
test temperatures specified in the relevant luminaire standards.
-
IT and Consumer Electronics: Checks power supply enclosures, connector bodies, and internal
support components for permanent deformation when exposed to operating temperatures.
-
Terminal Block and Connector Suppliers: Verifies that thermoplastic housings maintain their
shape when subjected to prolonged heat exposure and clamping forces.
-
Solid Insulating Material Development: Provides a consistent method for comparing different
thermoplastic and thermoset materials by measuring indentation diameter at a specified temperature.
-
Safety Certification Laboratories: Supports routine heat resistance assessments across
multiple IEC product categories using a single testing fixture.
-
Incoming Quality Control: Enables manufacturers to examine batches of supplier-provided
molded components for heat resistance before releasing them for production assembly.
Standards
The QualiHSA™ BPT supports ball pressure testing requirements specified across several IEC standards covering
electrical appliances, connection accessories, lighting equipment, and IT products. These standards establish the
requirements for assessing the resistance of non-metallic insulating components to deformation under elevated
temperatures. The apparatus provides the specified 5 mm ball, 20 N loading force, and specimen support arrangement,
while the applicable product standard determines the temperature at which each component must be evaluated.
The relevant standards include:
-
IEC 60695-10-2 – Ball Pressure Test Method: Specifies the test method for evaluating the
resistance of materials to abnormal heat through controlled ball pressure loading.
-
IEC 60335-1 – Household and Similar Electrical Appliances: Covers general safety
requirements for electrical appliances, including relevant heat resistance assessments of non-metallic
components.
-
IEC 60598-1 – Luminaires: Establishes general requirements and testing provisions for
lighting equipment.
-
IEC 60884-1 – Plugs and Socket-Outlets: Defines general requirements for household and
similar electrical plugs and socket-outlets.
-
IEC 60320-1 – Appliance Couplers: Addresses general requirements for appliance couplers used
in household and similar applications.
-
IEC 60950-1 – Information Technology Equipment: Covers general safety requirements for IT
equipment.
The required test temperature must be selected according to the applicable product standard and the component being
assessed.
Ball Pressure Test Apparatus – QualiHSA™ BPT Key Features
The QualiHSA™ BPT is built around a mechanically controlled loading arrangement that delivers the specified test
conditions without complicated operating systems. Its stainless steel construction, defined specimen support
dimensions, and dead-weight loading mechanism provide the essential components for repeatable ball pressure testing.
Each design element serves a specific purpose, from maintaining the applied force to preserving specimen temperature
during exposure.
-
Precisely Defined Pressure Ball Geometry: Uses a 5 mm diameter steel ball with an R2.5 mm
spherical surface, providing the standardized contact geometry required for consistent indentation testing.
-
Controlled Dead-Weight Loading: Applies a total force of 20 N ± 0.2 N, including the weight
of the pressure ball. The mechanical loading arrangement avoids spring-based force application.
-
Thermally Stable Specimen Support: Features a solid stainless steel cylinder measuring 50 mm
in diameter and 100 mm in length. Its substantial mass helps maintain the specimen at the required
temperature throughout the test.
-
Stainless Steel Loading and Support Components: Both assemblies are manufactured from
stainless steel to withstand repeated high-temperature exposure while resisting oxidation and dimensional
changes.
-
Compatible with Separate Heating Cabinets: Operates independently of the heating system,
allowing laboratories to select the required test temperature using an existing heating cabinet with
suitable capacity.
-
Simple Mechanical Test Arrangement: Allows operators to prepare the fixture, position the
heated specimen, and apply the pressure ball without electrical connections or electronic controls.
-
Versatility Across IEC Testing Programs: Accommodates ball pressure assessments for
electrical appliances, plugs, socket-outlets, appliance couplers, luminaires, and IT equipment without
changing the fixture geometry.
-
Minimal Servicing Requirements: Its construction contains no motors, sensors, or electronic
control components. Routine maintenance primarily involves checking the pressure ball's condition and
verifying the applied loading force.
Theory and Method
When thermoplastic materials are exposed to increasing temperatures, their ability to resist deformation
progressively decreases as they approach their softening range. This change does not necessarily occur at a clearly
defined point. Instead, a material that remains rigid under normal room conditions may gradually deform when
subjected to a constant mechanical force at an elevated temperature. The ball pressure test provides a measurable
way to assess this behavior by maintaining a defined load and contact geometry for a specified period, then
examining the permanent indentation left in the specimen. This evaluation is particularly important for electrical
insulating components, where heat-induced deformation can alter the position of supporting structures, reduce
creepage distances, or bring energized conductors closer to surrounding components.
During testing, the 5 mm steel ball applies a 20 N force over a relatively small contact area, initially
concentrating the load into a contact circle considerably smaller than one millimeter. This produces a high
localized stress compared with the pressure generated by a flat-ended loading tool. As the ball penetrates the
material, its curved surface progressively increases the contact area. The resulting reduction in localized stress
limits further penetration and helps prevent uncontrolled indentation. Maintaining the specified force for 60
minutes allows the material's viscoelastic response to develop, including time-dependent creep under sustained
loading. Once the exposure period is complete, cooling the specimen in water stabilizes the resulting deformation
before elastic recovery can significantly influence the measurement.
Reliable results also require the specimen to remain at the prescribed temperature throughout the loading period. The
solid stainless steel support cylinder provides the thermal mass needed to maintain the temperature around the
contact area while the pressure ball acts on the specimen. Its stainless steel construction also resists surface
scaling that could gradually affect flatness and introduce inconsistencies between tests. Before testing begins, the
support and loading assembly are heated inside the cabinet so that introducing the specimen does not create an
unwanted temperature fluctuation. Following the prescribed cooling process, the operator measures the indentation
without unnecessary delay. A magnifier and calibrated cross-travel stage are used to determine the indentation
diameter, providing the measurement needed to evaluate the specimen against the applicable acceptance limit.
Ball Pressure Test Apparatus - QualiHSA™ BPT Technical Specifications
| Parameter |
Specification |
| Ball Diameter |
5 mm (R2.5 mm) |
| Total Test Force |
20 N ± 0.2 N, including the mass of the ball |
| Specimen Support |
Solid stainless steel cylinder, 50 mm diameter × 100 mm long |
| Materials of Construction |
Stainless steel throughout |
| Heating Source |
Separate heating cabinet or oven, not supplied |
| Test Temperature |
Set by the applicable product standard |
| Acceptance Criterion |
Indentation diameter not exceeding 2.0 mm |
Test Sequence
| Step |
Parameter |
| Preheat |
Support and loading device brought to test temperature in the heating cabinet before the specimen is
introduced |
| Hold at temperature |
60 minutes, +2 / 0 minutes |
| Transfer to water |
Within 10 seconds of removing the load |
| Cooling |
Specimen cooled in water at 20 °C ± 5 °C until it returns to approximately room temperature |
| Measurement |
Indentation diameter read within 3 minutes of removal from the water |
| Result |
Pass when the indentation diameter does not exceed 2.0 mm |