Pull Out Mid-Heavy Anchor Tester - QualiAnchor 2006 enable engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 50kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analog gauge, making the tester very reliable.
The load spreading bridge keeps reaction loads away from the fixing. Fixings up to M16 may be located directly in the tester, while a variety of adaptors enable a wide range of other types and sizes to be tested.
Increased Gauge Scope
The QualiAnchor 2006 features a 50kN (5 ton) analogue gauge as standard. Digital gauges are also available.
To accommodate the increased load, although the main tester is similar in appearance to QualiAnchor 2000, many key internal components parts have been upgraded.
A new turning handle has been developed to accommodate the larger load. It offers a larger handle for ease of use and features an integrated M24 operating nut for use with a ratchet spanner for operation in confined spaces.
Reinforced Load Spreading Bridge
To sustain a 50kN load a new robust bridge design has been made which is denser in profile. It features three telescopic legs with pin arrangement in six positions and 30mm of fine adjustment at the base.
Threaded Stud Adaptors - New longer design M16, M20 and M24 as standard with optional M10, M12 and M30.
Slotted Button Adaptors - 6.5, 8.5, 10.5 and 12.5 as standard with optional 4.5 and 5.5.
Threaded Button Adaptors - M10 and M12 as standard with optional M4, M5, M6 and M8.
Ringbolt Adaptor Clevis - Rated to 50kN.