{"product_id":"ipx7-ipx8-water-immersion-tank","title":"IPX7 IPX8 Water Immersion Tank","description":"\u003ch2\u003eIPX7 IPX8 Water Immersion Tank – Quali-IPX™ WIT\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WIT IPX7 IPX8 Water Immersion Tank enables manufacturers and testing laboratories to assess how effectively product enclosures withstand temporary and prolonged water submersion. Its stainless steel vessel measures 500 mm in diameter and 1,200 mm in depth, providing the water column needed to conduct the 1 m immersion test specified under IPX7. For IPX8 testing, the sealed vessel can be pressurized to reproduce substantially greater underwater depths. Qualitest offers three pressure configurations, allowing laboratories to select a range that corresponds to the immersion depth declared for the product.\u003c\/p\u003e\n\u003cp\u003eAlthough IPX7 and IPX8 both involve submerging an enclosure, they impose different testing conditions. IPX7 evaluates protection during a 30-minute immersion at atmospheric pressure, with the required depth established by the water column. IPX8 addresses continuous submersion under conditions that exceed those of IPX7. Because the standard does not prescribe one universal depth for this classification, the manufacturer must specify the intended operating depth. The Quali-IPX™ WIT recreates these deeper conditions by pressurizing its sealed vessel, eliminating the need for an impractically tall water column.\u003c\/p\u003e\n\u003cp\u003eDesigned for products such as watches, smartphones, cameras, lighting equipment, battery packs, and sensors, the tank accommodates a broad range of compact components and assemblies. Its stainless steel construction provides resistance to corrosion during repeated exposure to water, while custom vessel dimensions are available when larger specimens require additional space. Since immersion testing requires pressure-rated equipment beyond the water circuits used for drip, spray, and jet testing, it represents an additional capability for laboratories expanding their IP testing services. Qualitest provides the Quali-IPX™ WIT for facilities seeking to complete their enclosure protection testing capabilities with both IPX7 and IPX8 evaluations.\u003c\/p\u003e\n\u003ch2\u003eIPX7 IPX8 Water Immersion Tank – Quali-IPX™ WIT Applications\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WIT supports immersion testing across industries where products must maintain enclosure integrity during exposure to standing water or underwater conditions. It helps manufacturers evaluate whether their sealing designs meet declared IPX7 or IPX8 protection levels before products are released or submitted for certification. The following applications cover products whose dimensions are compatible with the tank:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWearable Technology and Timepieces:\u003c\/strong\u003e Manufacturers of smartwatches, fitness trackers, and hearables can use the tank to verify whether device enclosures maintain their sealing performance at the 1 m immersion depth associated with IPX7 claims.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMobile Devices and Portable Electronics:\u003c\/strong\u003e Smartphone and tablet manufacturers can assess enclosure sealing, including the protection provided around charging ports and other sealed openings, under the 30-minute immersion conditions required for IPX7.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRechargeable Batteries and Battery Assemblies:\u003c\/strong\u003e Battery manufacturers can investigate water ingress protection around pack enclosures, ventilation points, and terminal glands, particularly where compromised seals could introduce safety concerns.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eImaging Equipment and Underwater Optics:\u003c\/strong\u003e Camera manufacturers can evaluate the sealing integrity of action cameras, underwater housings, and lens assemblies intended to remain functional during submerged use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive Electrical Systems:\u003c\/strong\u003e Automotive component suppliers can test electronic control modules, connectors, and fording sensors designed to withstand standing-water exposure. The specimen must fit within the vessel's working diameter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUnderwater and Outdoor Lighting Equipment:\u003c\/strong\u003e Lighting manufacturers can verify the immersion protection of pool fixtures, landscape luminaires, and marine lighting products carrying ratings for continuous underwater operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWaterproof Electrical and Electronic Components:\u003c\/strong\u003e Component manufacturers can examine whether connectors, switches, and potted electronic modules maintain their protective barriers when subjected to the water pressure associated with their specified immersion conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent Testing and Certification Laboratories:\u003c\/strong\u003e Testing organizations can use the Quali-IPX™ WIT to extend their existing enclosure protection services beyond drip, spray, and jet assessments, adding dedicated IPX7 and IPX8 immersion testing capabilities.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStandards\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WIT is designed to support the immersion test procedures described in Clauses 14.2.7 and 14.2.8 of IEC 60529. These provisions establish the test conditions for temporary immersion under IPX7 and continuous immersion under IPX8, respectively.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIEC 60529\u003c\/strong\u003e – Degrees of Protection Provided by Enclosures (IP Code)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIPX7 IPX8 Water Immersion Tank – Quali-IPX™ WIT Key Features\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WIT uses a sealed, pressure-rated vessel to accommodate the different requirements of IPX7 and IPX8 testing within one system. Its design combines the necessary immersion capacity with selectable pressure configurations, flexible specimen accommodation, and corrosion-resistant construction.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e1,200 mm Vessel Depth:\u003c\/strong\u003e Provides sufficient water column height for the IPX7 immersion requirement of 1 m, allowing the specified depth to be established directly within the vessel without additional fixtures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThree Selectable Pressure Ranges:\u003c\/strong\u003e Available with a specified pressure range of 0 to 2.94 bar, 0 to 4.90 bar, or 0 to 9.81 bar, corresponding to approximately 30 m, 50 m, and 100 m of simulated water depth, respectively.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Pressurized Design:\u003c\/strong\u003e Creates deep-water immersion conditions inside a vessel slightly over one meter tall, avoiding the need for an exceptionally deep tank or extended open water column.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e500 mm Working Diameter:\u003c\/strong\u003e Provides space for testing watches, smartphones, cameras, battery packs, and other compact products or component assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFull Stainless Steel Construction:\u003c\/strong\u003e Offers resistance to corrosion caused by continuous water exposure while maintaining pressure integrity over repeated testing cycles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Vessel Sizing:\u003c\/strong\u003e Allows both vessel diameter and height to be manufactured to specified dimensions when the standard configuration cannot accommodate the test specimen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Vessel for Both Immersion Levels:\u003c\/strong\u003e Supports unpressurized testing for IPX7 and pressurized testing for IPX8, providing both immersion capabilities within one unit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eUnlike drip, spray, and jet testing, which expose an enclosure to moving water, immersion testing evaluates its ability to withstand continuous hydrostatic pressure. Water in these other tests strikes the specimen with movement, direction, and momentum. During submersion, however, the water remains static and applies pressure simultaneously across the entire enclosure surface. This changes the primary sealing considerations, placing greater emphasis on gasket compression, threaded connections, and the permeability of enclosure materials. The depth of immersion determines the pressure applied, with each meter of water column producing approximately 9.81 kPa of hydrostatic pressure.\u003c\/p\u003e\n\u003cp\u003eFor IPX7, IEC 60529 establishes specific immersion dimensions and test duration. When the specimen is less than 850 mm tall, its lowest point must be positioned 1,000 mm below the water surface. For specimens measuring 850 mm or more in height, the highest point must remain 150 mm below the surface. The immersion period is 30 minutes, and the water temperature must remain within 5 K of the specimen's temperature. With its 1,200 mm vessel depth, the Quali-IPX™ WIT can accommodate the first arrangement directly, providing the required 1 m water column above the specimen's lowest point with additional clearance. IPX7 testing takes place without pressurization because the water column itself generates the necessary hydrostatic pressure.\u003c\/p\u003e\n\u003cp\u003eIPX8 testing follows a different approach because IEC 60529 does not establish a single fixed immersion depth or duration. Instead, the test conditions must be more demanding than those specified for IPX7 and representative of the continuous submersion conditions the product is designed to withstand. The manufacturer declares the required depth and duration, which then determine the test configuration. Creating equivalent water pressure for depths such as 30 m or 100 m using an open tank would require an impractical water column. The Quali-IPX™ WIT addresses this limitation through its sealed, pressurized vessel. Its available gauge pressure configurations reproduce the following approximate water depths:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e2.94 bar:\u003c\/strong\u003e Simulates a water depth of approximately 30 m.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e4.90 bar:\u003c\/strong\u003e Simulates a water depth of approximately 50 m.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e9.81 bar:\u003c\/strong\u003e Simulates a water depth of approximately 100 m.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIPX7 IPX8 Water Immersion Tank - Quali-IPX™ WIT Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eQuali-IPX™ WIT\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Test Levels\u003c\/td\u003e\n\u003ctd\u003eIPX7, IPX8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank Diameter\u003c\/td\u003e\n\u003ctd\u003e500 mm (custom diameters available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank Height\u003c\/td\u003e\n\u003ctd\u003e1,200 mm (custom heights available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Range Options\u003c\/td\u003e\n\u003ctd\u003e0 to 2.94 bar, 0 to 4.90 bar, or 0 to 9.81 bar (0 to 3, 0 to 5, or 0 to 10 kgf\/cm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSimulated Depth Equivalent\u003c\/td\u003e\n\u003ctd\u003eApproximately 30 m, 50 m, or 100 m of water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference Standard\u003c\/td\u003e\n\u003ctd\u003eIEC 60529, Clauses 14.2.7 and 14.2.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":53636625137975,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/ipx7-ipx8-water-immersion-tank15.webp?v=1794848948","url":"https:\/\/qualitest.us\/pt\/products\/ipx7-ipx8-water-immersion-tank","provider":"Qualitest USA LC","version":"1.0","type":"link"}