{"product_id":"compact-geotextile-cone-drop-tester","title":"Compact Geotextile Cone Drop Tester","description":"\u003ch2\u003e\u003cspan\u003eCompact Geotextile Cone Drop Tester – QualiGTX™ CDT C\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4\u003e\u003cspan\u003eGeotextile Dynamic Perforation Tester, 1 kg Cone and 500 mm Drop Height\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe QualiGTX™ CDT C is designed to measure the resistance of geotextiles and related geosynthetic materials to damage caused by impact from a falling steel cone. During testing, a 1 kg cone is released from a fixed height of 500 mm onto a securely clamped specimen. The impact punctures the material, and the resulting hole diameter is measured to determine its dynamic perforation resistance. Smaller openings indicate better resistance to impact damage. This compact model delivers the same testing principle in the narrowest frame configuration within the Qualitest cone drop tester range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaboratory space is a central consideration in the CDT C design. Its supporting column is mounted on a 450 × 350 mm base, allowing installation in confined areas such as wall sections, corners, and narrow aisle spaces. With a total weight of 45 kg, the tester provides sufficient stability during repeated impacts while remaining manageable for two technicians to relocate between workstations. This makes it a practical addition to civil engineering laboratories that already accommodate compaction, sieving, and CBR testing equipment but have limited available floor space.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe testing assembly maintains the specified cone drop configuration, comprising a 45° stainless steel cone weighing 1000 g, including its guide rod, a clamping ring with a 150 mm clear opening, and a graduated measuring cone for determining the perforation diameter. Its entirely manual operating mechanism eliminates the need for electronic calibration, electrical connections, or complicated controls. The QualiGTX™ CDT C is suitable for materials testing laboratories, geosynthetic manufacturers, and project inspection facilities that require reliable perforation measurements for product deliveries and technical submissions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003e\u003cspan\u003eCompact Geotextile Cone Drop Tester – QualiGTX™ CDT C Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe QualiGTX™ CDT C helps laboratories and manufacturers determine how geotextile materials withstand sudden impact during handling, installation, and service. By measuring the perforation produced by a controlled cone drop, it provides comparative data for selecting protective fabrics, checking production consistency, and assessing material suitability for demanding civil engineering and environmental projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eGeotextile Compliance and Acceptance Testing:\u003c\/span\u003e\u003cspan\u003e Supports laboratory evaluation of geotextile deliveries by measuring their resistance to dynamic puncture. The results help verify material suitability before fabrics are approved for use in construction projects.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGeomembrane Liner Protection:\u003c\/span\u003e\u003cspan\u003e Evaluates cushioning and protective geotextiles placed between geomembranes and surrounding aggregate. Comparing perforation resistance helps engineers select suitable materials for reducing the risk of liner damage from sharp stones.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eConstruction Material Inspection:\u003c\/span\u003e\u003cspan\u003e Helps identify geotextile rolls with inadequate impact resistance before installation. Testing provides an additional quality checkpoint for materials that will be covered by coarse aggregate or subjected to heavy construction activity.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGeosynthetic Manufacturing Quality Control:\u003c\/span\u003e\u003cspan\u003e Enables manufacturers to monitor changes in dynamic perforation resistance during production. Testing woven, nonwoven, and needle-punched fabrics helps maintain consistent product performance across manufacturing batches.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLandfill Lining and Environmental Protection:\u003c\/span\u003e\u003cspan\u003e Assesses geotextiles used in landfill basal protection, final capping systems, and leachate collection assemblies. These applications require protective fabrics capable of withstanding contact with surrounding drainage materials and other aggregates.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRoad and Transportation Infrastructure:\u003c\/span\u003e\u003cspan\u003e Evaluates geotextile separation and stabilization layers installed over weak soil formations. The measurements help assess fabric resistance to aggregate impact during roadbed preparation, highway construction, and airfield development.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHydraulic Engineering and Erosion Control:\u003c\/span\u003e\u003cspan\u003e Tests filter fabrics installed beneath riprap, gabions, and channel protection structures. The results help compare materials used to protect underlying soil while supporting erosion-control and hydraulic construction systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMining and Tailings Containment:\u003c\/span\u003e\u003cspan\u003e Determines the impact resistance of geotextiles used to protect containment liners in mining and tailings facilities. Testing is particularly relevant where coarse waste rock and heavy placement machinery create demanding installation conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eUniversity Research and Material Development:\u003c\/span\u003e\u003cspan\u003e Provides researchers, educators, and students with a practical method for investigating dynamic puncture behavior in geosynthetic materials. Its compact footprint makes it suitable for teaching laboratories and research facilities working with limited equipment budgets.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eCompact Geotextile Cone Drop Tester – QualiGTX™ CDT C Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe QualiGTX™ CDT C incorporates fixed mechanical dimensions to maintain consistent testing conditions and reliable measurements. Its straightforward manual design also allows operators to complete testing through a simple, repeatable procedure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eCompact 450 mm Frame Width:\u003c\/span\u003e\u003cspan\u003e Features the narrowest frame in the Qualitest cone drop tester range, providing flexible installation options for laboratories with limited floor and workstation space.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003ePrecision 45° Stainless Steel Cone:\u003c\/span\u003e\u003cspan\u003e Maintains the specified 45° tip angle, maximum diameter of 50 mm, and total mass of 1000 ± 5 g, including the guide rod, ensuring consistent impact conditions between tests.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Graduated Measuring Cone:\u003c\/span\u003e\u003cspan\u003e Supplied with a 600 g small-angle measuring cone for determining perforation diameter, eliminating the need to purchase a separate measuring instrument.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eControlled 500 mm Drop Height:\u003c\/span\u003e\u003cspan\u003e Maintains the distance between the cone tip and specimen within ±2 mm, minimizing variations caused by inconsistent height adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e150 mm Specimen Clamping Ring:\u003c\/span\u003e\u003cspan\u003e Provides a defined unsupported testing area, maintaining consistent specimen support so measurements reflect material properties rather than changes in clamping conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eVertical Guided Column:\u003c\/span\u003e\u003cspan\u003e Controls cone movement throughout the drop and directs the impact toward the specimen center, reducing alignment errors and irregular perforations caused by angled contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eFully Manual Testing Mechanism:\u003c\/span\u003e\u003cspan\u003e Operates without electricity, compressed air, or software, simplifying installation and reducing ongoing maintenance requirements to routine mechanical inspections.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eCorrosion-Resistant Stainless Steel Components:\u003c\/span\u003e\u003cspan\u003e Protects the cone tip and specimen clamping surfaces against corrosion, helping maintain their condition and geometry during extended routine use.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e45 kg Stable Construction:\u003c\/span\u003e\u003cspan\u003e Provides sufficient mass to minimize recoil and maintain alignment of the supporting column and clamping ring while allowing the tester to be relocated when laboratory arrangements change.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTheory and Test Method\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDynamic cone drop testing evaluates how a material responds when subjected to a controlled impact over a very short period. Releasing a 1 kg cone from a height of 500 mm delivers approximately 4.9 joules of impact energy to the specimen. Because the cone mass and release height remain constant throughout testing, the applied energy is consistent, allowing differences in the resulting damage to indicate variations in material resistance. The speed of loading is particularly important. Under gradual loading, fibers have time to redistribute stress throughout the fabric structure. An impact, however, applies the load rapidly, creating localized stress before the fibers can effectively redistribute it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe cone's geometry determines how this energy is concentrated within the specimen. Its 45° included angle creates a relatively narrow contact area, initially concentrating the applied force across a region measuring only a few square millimeters. As the cone penetrates the fabric, localized stress increases, causing individual filaments to stretch, fiber bonds to separate, and the material to open along the path of least resistance. After the cone completes its movement and is withdrawn, the operator places the graduated measuring cone into the resulting opening and records the diameter at which the measuring cone seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecimen support is another important factor in obtaining representative results. The clamping ring securely holds the specimen around its perimeter while maintaining a 150 mm unsupported span. This allows the fabric to deflect downward during impact, reproducing the response of geotextile installed over a yielding subgrade rather than material supported by a rigid surface. The arrangement represents a typical field condition in which angular aggregate strikes the geotextile during placement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe resulting perforation diameter provides an index for comparing the dynamic impact resistance of different geosynthetic materials. These measurements complement static puncture resistance, tensile strength, and tear resistance results, providing additional information about material performance without replacing other mechanical tests.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eCompact Geotextile Cone Drop Tester - QualiGTX™ CDT C Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping Ring Inner Diameter\u003c\/td\u003e\n\u003ctd\u003e150 ± 0.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop Height (Cone Tip to Specimen)\u003c\/td\u003e\n\u003ctd\u003e500 ± 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop Cone Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop Cone Maximum Diameter\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop Cone Angle\u003c\/td\u003e\n\u003ctd\u003e45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop Cone Total Mass (Including Guide Rod)\u003c\/td\u003e\n\u003ctd\u003e1000 ± 5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGraduated Measuring Cone Mass\u003c\/td\u003e\n\u003ctd\u003e600 ± 5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Lifting and Release\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecimen Clamping\u003c\/td\u003e\n\u003ctd\u003eManual clamping ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Dimensions (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e450 × 350 × 1500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded Components\u003c\/h3\u003e\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel Drop Cone Assembly\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e45° cone angle, 50 mm maximum diameter, 1000 ± 5 g total mass including guide rod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGraduated Measuring Cone\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e600 ± 5 g small-angle cone for reading perforation diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecimen Clamping Ring Assembly\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003ctd\u003e150 ± 0.5 mm clear inner diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":53603118711095,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/compact-geotextile-cone-drop-tes.webp?v=1794474904","url":"https:\/\/qualitest.us\/fr\/products\/compact-geotextile-cone-drop-tester","provider":"Qualitest USA LC","version":"1.0","type":"link"}