{"product_id":"ipx5-ipx6-water-jet-tester","title":"IPX5 IPX6 Water Jet Tester","description":"\u003ch2\u003eIPX5 IPX6 Water Jet Tester – Quali-IPX™ WJT\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WJT is a dedicated IPX5 and IPX6 water jet testing system designed to assess how effectively\n    electrical enclosures withstand directed water exposure under the two severity levels defined by IEC 60529. It\n    serves manufacturers and certification laboratories requiring controlled, repeatable water ingress testing. The\n    system combines two independent water pumps, interchangeable stainless steel jet nozzles, brass plumbing\n    connections, and PLC-based operation through a touchscreen interface. Qualitest provides the complete water delivery\n    console as an integrated testing solution.\u003c\/p\u003e\n\u003cp\u003eUnlike lower IP protection tests, jet testing requires substantial and accurately regulated water delivery. The IPX6\n    procedure demands a continuous flow of 100 L\/min for a test period that may extend over several minutes, whereas\n    IPX5 requires a considerably lower rate of 12.5 L\/min. A pump designed primarily for the higher flow would not\n    provide the same level of control when operating at the lower rate. To address this difference, the Quali-IPX™ WJT\n    incorporates two pumps with separate operating capacities: 0 to 7 m³\/h for high-volume jet testing and 0 to 3 m³\/h\n    for the lower-flow requirement.\u003c\/p\u003e\n\u003cp\u003eA precision pressure regulator works alongside digital flow control to maintain the selected test conditions. The\n    integrated filtration system removes suspended particles before they can obstruct the nozzle openings, while the\n    motorized turntable rotates specimens at 1 rpm to facilitate water exposure from all practicable directions.\n    Stainless steel nozzles and brass pipework provide corrosion resistance in an environment involving continuous water\n    contact. The touchscreen provides English-language operation, with additional interface languages available upon\n    request.\u003c\/p\u003e\n\u003ch2\u003eIPX5 IPX6 Water Jet Tester – Quali-IPX™ WJT Applications\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WJT is suitable for product development, quality assurance, and compliance testing involving equipment\n    exposed to forceful water streams. It addresses applications where protection against hose cleaning, intense\n    rainfall, and pressure washing is essential, covering both IPX5 and IPX6 enclosure protection\n    requirements.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eOutdoor and Industrial Lighting\u003c\/strong\u003e: Evaluates the ingress protection of floodlights, high-bay\n        luminaires, and tunnel lighting fixtures used in exposed installations. Testing is particularly relevant to\n        lighting systems that require regular cleaning or operate in locations where powerful water jets may reach their\n        enclosures, with reference to IEC 60598-1.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eFood and Beverage Production Machinery\u003c\/strong\u003e: Assesses the ability of electrical control boxes,\n        industrial sensors, and motor drive enclosures to withstand repeated sanitation wash-downs. This helps verify\n        enclosure protection for equipment installed in production areas where cleaning involves direct water streams.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eHousehold Electrical Appliances\u003c\/strong\u003e: Supports water resistance testing of appliances designed for\n        outdoor use or installation in moisture-prone areas. Manufacturers can assess enclosure protection against\n        directed water exposure in relation to the safety requirements of IEC 60335-1.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003ePortable Power Tools\u003c\/strong\u003e: Determines whether hand-held motor-operated electrical tools can\n        withstand water exposure associated with demanding working environments and equipment cleaning. The testing\n        applies to products covered by IEC 60745-1.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eElectric Motors and Pump Assemblies\u003c\/strong\u003e: Examines the enclosure protection of rotating electrical\n        machines used in industrial wash-down facilities and marine applications. The test exposes motor and pump\n        housings to directed water streams to evaluate their resistance to water ingress under these operating\n        conditions.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eMarine and Offshore Electrical Systems\u003c\/strong\u003e: Tests deck-mounted electronics and electrical\n        enclosures designed for vessels and offshore installations. These components may encounter substantial water\n        exposure from green water and routine hose cleaning, making IPX5 and IPX6 protection relevant to their\n        assessment.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eElectrical Distribution Enclosures\u003c\/strong\u003e: Verifies the protection provided by outdoor electrical\n        cabinets and junction boxes against forceful water streams. This is particularly important for distribution\n        equipment installed in locations where hose cleaning or direct water exposure is part of normal site conditions.\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cstrong\u003eIndependent Testing and Certification Facilities\u003c\/strong\u003e: Provides laboratories with a single water jet\n        testing system for conducting both IPX5 and IPX6 assessments. The separate pump capacities and controlled flow\n        delivery support testing at the distinct rates required for each classification.\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStandards\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WJT is configured to support water jet testing in accordance with the nozzle dimensions and water\n    delivery requirements referenced by the following standards. These documents establish the applicable product safety\n    and enclosure protection requirements associated with IPX5 and IPX6 testing.\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIEC 60529\u003c\/strong\u003e – Degrees of Protection Provided by Enclosures (IP Code)\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIEC 60335-1\u003c\/strong\u003e – Household and Similar Electrical Appliances, Safety, Part 1: General\n            Requirements\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIEC 60598-1\u003c\/strong\u003e – Luminaires, Part 1: General Requirements and Tests\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIEC 60745-1\u003c\/strong\u003e – Hand-Held Motor-Operated Electric Tools, Safety, Part 1: General Requirements\n        \u003c\/p\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIPX5 IPX6 Water Jet Tester – Quali-IPX™ WJT Key Features\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WJT is engineered around the need to maintain accurate water delivery throughout IPX5 and IPX6\n    testing. Its defining design feature is the use of two independently sized pumps, allowing the system to handle the\n    substantial difference between the flow requirements of the two test classifications without compromising low-flow\n    regulation.\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIndependent Dual-Pump Configuration\u003c\/strong\u003e: Provides separate pumping capacities for the two test\n            levels. The 0 to 7 m³\/h pump handles the high-volume IPX6 requirement, while the 0 to 3 m³\/h pump supplies\n            the lower IPX5 flow rate. This arrangement allows each pump to operate within a more suitable control range\n            instead of forcing one pump to accommodate widely different delivery demands.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomated Digital Flow Regulation\u003c\/strong\u003e: Allows operators to specify the required water delivery\n            rate directly through the control interface. The system regulates flow to the selected value, reducing\n            dependence on repeated manual valve adjustments that could cause fluctuations during extended testing.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003ePrecision Pressure Regulation\u003c\/strong\u003e: Controls variations in the incoming water supply to support\n            stable jet delivery throughout the test cycle.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eReplaceable Stainless Steel Jet Nozzles\u003c\/strong\u003e: Uses interchangeable nozzles fitted to a shared jet\n            handle. Operators can change between IPX5 and IPX6 nozzle configurations quickly when switching test\n            requirements.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eSeparate Water Supply Connections\u003c\/strong\u003e: Includes two independent water inlets, providing\n            dedicated feeds for the respective pumps and avoiding the need to restrict one pump's supply to accommodate\n            the other.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eBuilt-In Flow Measurement\u003c\/strong\u003e: Features an integrated flow meter that displays the actual water\n            delivery rate, enabling operators to confirm that the system meets the specified flow requirement.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eCorrosion-Resistant Brass Pipework\u003c\/strong\u003e: Uses brass plumbing components to withstand prolonged\n            contact with water while maintaining internal passage dimensions over the equipment's service life.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003ePLC-Controlled Touchscreen\u003c\/strong\u003e: Brings pump selection, flow adjustment, and test operation\n            together through a centralized English-language touchscreen interface.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eIntegrated Water Filtration\u003c\/strong\u003e: Removes particulate contamination from the water supply before\n            it enters the nozzles, helping prevent blockage and maintain the intended jet characteristics.\u003c\/p\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cp\u003e\u003cstrong\u003eRotating Specimen Turntable\u003c\/strong\u003e: Rotates test enclosures at 1 rpm, allowing operators to expose\n            different surfaces and orientations to the water stream and cover all practicable directions required by the\n            test method.\u003c\/p\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eWater jet testing evaluates enclosure protection under conditions that differ considerably from conventional water\n    spray exposure. A spray distributes water as individual droplets with relatively low momentum, which can often be\n    redirected by enclosure features such as gasket edges. A concentrated jet behaves differently: its continuous stream\n    delivers greater localized force against the surface it strikes, including joints, ventilation openings, and cable\n    glands. Under IEC 60529, the progression from IPX5 to IPX6 increases the severity of exposure primarily through a\n    larger nozzle opening and substantially greater water flow, rather than through a major increase in supply pressure.\n\u003c\/p\u003e\n\u003cp\u003eThe two classifications are distinguished by their specified nozzle diameters and delivery rates. IPX5 testing uses a\n    6.3 mm nozzle with a flow rate of 12.5 L\/min, whereas IPX6 requires a 12.5 mm nozzle delivering 100 L\/min. Both\n    classifications specify a nozzle-to-specimen distance of 2.5 m to 3 m. Because the IPX6 nozzle has twice the bore\n    diameter, its cross-sectional area is four times greater; the corresponding specified water flow is eight times\n    higher than that of IPX5. This substantial difference in delivery requirements explains why the two classifications\n    cannot be treated as minor variations of the same test setting.\u003c\/p\u003e\n\u003cp\u003eExposure time is determined by the enclosure's exposed surface area, with one minute of testing required per square\n    meter and a minimum duration of three minutes. This ensures that specimens receive the prescribed water exposure\n    over the required testing period.\u003c\/p\u003e\n\u003cp\u003eAccurate flow regulation is central to achieving valid test conditions. Under the method, operators adjust the water\n    supply pressure until the flow meter indicates the specified delivery rate. Pressure is therefore regulated to\n    achieve the required flow rather than treated as the primary setting that determines water delivery. The Quali-IPX™\n    WJT incorporates a precision pressure regulator and integrated flow measurement to support this process, while its\n    independent pumps provide more appropriate control at each test level. Attempting to deliver 12.5 L\/min using a pump\n    designed for 100 L\/min would place the operating point near the bottom of its capacity range, where precise flow\n    adjustment becomes more difficult. The dual-pump arrangement addresses this limitation by matching each pump's\n    capacity to the corresponding IPX5 or IPX6 requirement.\u003c\/p\u003e\n\u003ch2\u003eIPX5 IPX6 Water Jet Tester - Quali-IPX™ WJT Technical Specifications\u003c\/h2\u003e\n\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eParameter\u003c\/th\u003e\n            \u003cth\u003eQuali-IPX™ WJT\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSupported Test Levels\u003c\/td\u003e\n            \u003ctd\u003eIPX5, IPX6\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFlow Control\u003c\/td\u003e\n            \u003ctd\u003eDigital, with settable delivery rate\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePressure Regulation\u003c\/td\u003e\n            \u003ctd\u003ePrecision pressure regulator\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHigh-Flow Supply Pump\u003c\/td\u003e\n            \u003ctd\u003e0 to 7 m³\/h (manual control)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLow-Flow Supply Pump\u003c\/td\u003e\n            \u003ctd\u003e0 to 3 m³\/h\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWater Supply Inlets\u003c\/td\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePipe Material\u003c\/td\u003e\n            \u003ctd\u003eBrass\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNozzle Material\u003c\/td\u003e\n            \u003ctd\u003eStainless steel, interchangeable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTurntable Rotation Speed\u003c\/td\u003e\n            \u003ctd\u003e1 rpm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eControl System\u003c\/td\u003e\n            \u003ctd\u003ePLC with touch interface operation\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOperating Language\u003c\/td\u003e\n            \u003ctd\u003eEnglish (other languages available on request)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eVoltage\u003c\/td\u003e\n            \u003ctd\u003e220 V, single phase, 50 to 60 Hz, 2,000 W (custom supply available)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eReference Standard\u003c\/td\u003e\n            \u003ctd\u003eIEC 60529, Clauses 14.2.5 and 14.2.6, Figure 6\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded Components\u003c\/h3\u003e\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eItem\u003c\/th\u003e\n            \u003cth\u003eDescription\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWater supply system\u003c\/td\u003e\n            \u003ctd\u003eTwo-inlet supply with brass pipework\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHigh-flow supply pump\u003c\/td\u003e\n            \u003ctd\u003e0 to 7 m³\/h, serving the higher jet delivery rate\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLow-flow supply pump\u003c\/td\u003e\n            \u003ctd\u003e0 to 3 m³\/h, serving the lower jet delivery rate\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWater filter\u003c\/td\u003e\n            \u003ctd\u003eStrains particulates ahead of the nozzles\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eJet nozzles and tubes\u003c\/td\u003e\n            \u003ctd\u003eInterchangeable stainless steel nozzles on a common jet handle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFlow meter\u003c\/td\u003e\n            \u003ctd\u003eMonitors delivery rate during the test\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePrecision pressure regulator\u003c\/td\u003e\n            \u003ctd\u003eHolds delivery pressure steady through the run\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePLC controller\u003c\/td\u003e\n            \u003ctd\u003eTouch interface for flow setting and test control\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":53636125884727,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/ipx5-ipx6-water-jet-tester110559.webp?v=1794843097","url":"https:\/\/qualitest.us\/es\/products\/ipx5-ipx6-water-jet-tester","provider":"Qualitest USA LC","version":"1.0","type":"link"}