{"product_id":"ipx1-ipx4-waterproof-turntable-100-kg","title":"IPX1-IPX4 Waterproof Turntable (100 kg)","description":"\u003ch2\u003eIPX1-IPX4 Waterproof Turntable (100 kg) - Quali-IPX™ WT\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WT IPX1-IPX4 waterproof turntable moves a specimen through water ingress testing at a controlled rotation speed and tilt angle. Its stainless steel build supports specimens up to 100 kg, and the deck can be inclined anywhere from 0° to 15° for the tilted IPX2 sequence. Rotation speed is adjustable from 1 to 3 rpm. Qualitest supplies the unit as a specimen carrier for drip box and oscillating tube installations.\u003c\/p\u003e\n\u003cp\u003eThe reliability of a water ingress result depends on how the specimen is handled. A turntable that drifts in speed, sags under load, or loses its tilt angle partway through a test adds variation the test method never intended. The Quali-IPX™ WT keeps rotation and inclination steady at a full 100 kg while the specimen is exposed to continuous water. For specimens heavier than the standard rating, higher load capacities are available.\u003c\/p\u003e\n\u003cp\u003eQualitest provides the Quali-IPX™ WT for drip box, oscillating tube, and combined chamber installations. Laboratories also order it to replace a worn table or to add a second station for parallel testing. The turntable covers IPX1 through IPX4, which corresponds to the drip and spray methods in which the specimen turns beneath a fixed water source. Stainless steel throughout resists the corrosion caused by repeated wetting.\u003c\/p\u003e\n\u003ch2\u003eIPX1-IPX4 Waterproof Turntable (100 kg) - Quali-IPX™ WT Applications\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WT suits any water ingress test in which the specimen rotates beneath a stationary water source. Rotation and tilt requirements appear throughout the IPX1 through IPX4 methods and the product standards that reference them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip Box Testing (IPX1 and IPX2):\u003c\/strong\u003e Turns the specimen beneath the drip plate and delivers the 15° inclination required by the IPX2 sequence\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOscillating Tube Testing (IPX3 and IPX4):\u003c\/strong\u003e Rotates the specimen through the spray arc so that every face meets the water at the specified angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuminaire Certification:\u003c\/strong\u003e Carries wall packs, bollards, and fixtures through the ingress tests referenced in IEC 60598-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousehold Appliance Testing:\u003c\/strong\u003e Supports appliance housings and sub-assemblies evaluated against the water requirements of IEC 60335\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio, Video and Electronic Apparatus:\u003c\/strong\u003e Holds consumer electronics enclosures covered by IEC 60065 during ingress evaluation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchgear and Controlgear:\u003c\/strong\u003e Carries distribution boards and control cabinets through the IEC 60947-1 ingress sequence, up to the 100 kg limit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-Party Certification Laboratories:\u003c\/strong\u003e Offers a single, common specimen carrier for mixed client workloads and multiple test stations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit and Second-Station Builds:\u003c\/strong\u003e Replaces a worn turntable or adds specimen capacity to an existing water test room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStandards\u003c\/h2\u003e\n\u003cp\u003eThe Quali-IPX™ WT is designed to match the specimen handling conditions defined in the standards below. Each document references a water ingress test in which the specimen rotates beneath the water source.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIEC 60065 - Audio, Video and Similar Electronic Apparatus, Safety Requirements\u003c\/li\u003e\n\u003cli\u003eIEC 60335 - Household and Similar Electrical Appliances, Safety\u003c\/li\u003e\n\u003cli\u003eIEC 60529 - Degrees of Protection Provided by Enclosures (IP Code)\u003c\/li\u003e\n\u003cli\u003eIEC 60598-1 - Luminaires, Part 1: General Requirements and Tests\u003c\/li\u003e\n\u003cli\u003eIEC 60947-1 - Low-Voltage Switchgear and Controlgear, Part 1: General Rules\u003c\/li\u003e\n\u003cli\u003eVDE 0470 Part 1 (DIN EN 60529) - Degrees of Protection Provided by Enclosures (IP Code)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIPX1-IPX4 Waterproof Turntable (100 kg) - Quali-IPX™ WT Key Features\u003c\/h2\u003e\n\u003cp\u003eQualitest designed the Quali-IPX™ WT around the two variables the test method controls: rotation speed and tilt angle. Every other design decision supports load capacity and corrosion resistance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 kg Specimen Capacity:\u003c\/strong\u003e Supports cabinets, luminaires, appliance housings, and other heavy enclosures without the deflection that would alter the exposure geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 0° to 15° Inclination:\u003c\/strong\u003e Provides the flat orientation for IPX1, IPX3, and IPX4 testing as well as the tilted position IPX2 requires, so a single table serves all four levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 to 3 rpm Rotation:\u003c\/strong\u003e Covers the slow rotation specified for drip tests, along with the faster settings that some product standards call for\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Construction:\u003c\/strong\u003e Resists the corrosion that shortens the service life of painted or plated carriers in a water test room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Load Ratings:\u003c\/strong\u003e Capacity above 100 kg is available when specimen weight exceeds the standard rating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-Method Compatibility:\u003c\/strong\u003e Works beneath drip box, oscillating tube, and combined chamber installations, so the laboratory is not tied to one test geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eRotation addresses a coverage problem. A drip plate or oscillating tube delivers water along one fixed geometry, so a stationary specimen shows the same faces to the same water path throughout the test. Turning the specimen slowly beneath the source brings each side, seam, and vent into the water field in turn. IEC 60529 sets the rotation speed for drip tests at roughly 1 rpm, slow enough for every face to build up meaningful exposure instead of simply passing through.\u003c\/p\u003e\n\u003cp\u003eThe method also places the specimen off the axis of rotation, with an eccentricity of about 100 mm for drip testing. This offset sends the specimen along a circular path through the drop field rather than leaving its center fixed under a single point, which averages out local variation in the plate above. Deck flatness and drive stability are important here, because a table that wobbles or slows under load moves the exposure away from what the method assumes.\u003c\/p\u003e\n\u003cp\u003eInclination addresses the second characteristic numeral 2. IPX2 requires the specimen to be tilted 15° from its normal position and tested in four orientations, since tilting opens drainage paths and vent slots that stay protected when the enclosure is level. The Quali-IPX™ WT can be set to any angle from 0° to 15°, so one deck handles both the upright IPX1 test and the tilted IPX2 sequence. Returning the deck to 0° restores the flat orientation used for the spray tests.\u003c\/p\u003e\n\u003ch2\u003eIPX1-IPX4 Waterproof Turntable (100 kg) - Quali-IPX™ WT Technical Specifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ctable class=\"table table-style-align-center\" align=\"center\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eQuali-IPX™ WT\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle of Inclination\u003c\/td\u003e\n\u003ctd\u003e0° to 15°, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Specimen Load\u003c\/td\u003e\n\u003ctd\u003e100 kg (higher load ratings available on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation Speed\u003c\/td\u003e\n\u003ctd\u003e1 to 3 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Test Levels\u003c\/td\u003e\n\u003ctd\u003eIPX1, IPX2, IPX3, IPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference Standard\u003c\/td\u003e\n\u003ctd\u003eIEC 60529, Clauses 14.2.1 through 14.2.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":53384375206199,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/ipx1-ipx4-waterproof-turntable-1.webp?v=1792585314","url":"https:\/\/qualitest.us\/es\/products\/ipx1-ipx4-waterproof-turntable-100-kg","provider":"Qualitest USA LC","version":"1.0","type":"link"}