{"title":"Thermal Camera Analyzers","description":"\u003ch2\u003eThermal Camera Analyzers\u003c\/h2\u003e\n\u003cp\u003eStand-mounted and benchtop thermal camera analyzers for circuit board repair, materials testing, and IC-level failure analysis.\u003c\/p\u003e\n\u003cp\u003eThermal camera analyzers transform infrared radiation into detailed thermal images, making it easier to identify hot spots, overheating components, leakage paths, and thermal irregularities on circuit boards and material samples. Unlike a standard multimeter, a thermal imaging analyzer can visually identify where abnormal heat is concentrated. The QualiTCA™ thermal camera analyzer series includes four models, ranging from a compact foldable one-click leakage detector to a 640×512 research-grade thermal imaging system. Resolution, measurement capabilities, and analysis depth increase across the range, allowing users to select a configuration suited to their laboratory or electronics repair requirements.\u003c\/p\u003e\n\u003cp\u003eEntry-level QualiTCA™ models are designed for technicians who need rapid PCB leakage and short-circuit detection. Higher-performance models provide features such as macro-lens imaging, power meter integration, adjustable emissivity, radiometric video recording, and continuous temperature monitoring for IC failure analysis and materials research. The analyzers can connect to a PC or Android device and include dedicated thermal analysis software for detailed inspection and reporting.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer Applications\u003c\/h2\u003e\n\u003cp\u003eQualiTCA™ thermal camera analyzers are designed for electronics repair benches, engineering laboratories, quality control environments, and materials research applications. They allow users to identify thermal faults on powered circuit boards and test samples without removing components or performing unnecessary disassembly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCircuit Board Leakage and Short-Circuit Detection: Identify abnormal heat concentrations and locate potential leakage paths or short circuits on powered PCBs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIC and Component Failure Analysis: Detect overheating ICs, components, pins, and bond wires with detailed thermal imaging on higher-resolution models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaterials Thermal Conductivity and Heat Dissipation Testing: Monitor temperature distribution and heat transfer through conductive and insulating material samples.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeating Element and Heating Wire Characterization: Measure heating rates and temperature changes at different voltage and current levels.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE-Cigarette Atomizer Temperature Analysis: Monitor atomizer heating behavior, temperature rise, and thermal distribution during controlled testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct Quality Control and Aging Testing: Compare reference samples with test samples while monitoring thermal performance over extended test periods. The QualiTCA™ 64 supports continuous monitoring for long-duration testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThermal Camera Analyzer Range\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ lineup moves from a simple foldable leakage detector through benchtop, precision, and research-grade models. Resolution and analysis features are the two specs to compare first.\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eIR Resolution\u003c\/th\u003e\n\u003cth\u003eMeasurement Range\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eQualiTCA™ ™ 25A\u003c\/td\u003e\n\u003ctd\u003e256×192\u003c\/td\u003e\n\u003ctd\u003e-15°C to 600°C\u003c\/td\u003e\n\u003ctd\u003eFoldable, stand-mounted analyzer built for one-click leakage and short-circuit location on a powered circuit board, with 3D thermal field analysis and a magnification lens for close inspection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQualiTCA™ ™ 25B\u003c\/td\u003e\n\u003ctd\u003e256×192\u003c\/td\u003e\n\u003ctd\u003e-10°C to 550°C\u003c\/td\u003e\n\u003ctd\u003eAdds materials thermal analysis to the QualiTCA™™ 25A's circuit board diagnostics, with a multi-axial bracket, adjustable emissivity, and double board joining for a larger working area.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQualiTCA™ ™ 38\u003c\/td\u003e\n\u003ctd\u003e384×288\u003c\/td\u003e\n\u003ctd\u003e-20°C to 550°C\u003c\/td\u003e\n\u003ctd\u003ePrecision analyzer with a quick-change macro lens down to 25 microns and power meter integration, built for IC failure analysis and fine material inspection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQualiTCA™ ™ 64\u003c\/td\u003e\n\u003ctd\u003e640×512\u003c\/td\u003e\n\u003ctd\u003e-20°C to 550°C\u003c\/td\u003e\n\u003ctd\u003eThe highest-resolution model in the line, adding 24-hour continuous monitoring for long-duration reliability and aging tests.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Choose the Right Thermal Camera Analyzer\u003c\/h2\u003e\n\u003cp\u003eChoosing the right thermal camera analyzer depends on the required thermal resolution, testing application, measurement features, and monitoring duration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFor basic PCB leakage and short-circuit detection: Choose the QualiTCA™ 25A for a compact, foldable design with one-click diagnostic operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor PCB repair and broader materials analysis: Choose the QualiTCA™ 25B for adjustable emissivity and double-board joining analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor IC-level inspection and power meter correlation: Choose the QualiTCA™ 38 with a macro lens designed for detailed, micron-scale thermal inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor high-resolution imaging and extended testing: Choose the QualiTCA™ 64 for 640×512 thermal resolution and up to 24-hour continuous monitoring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Choose Qualitest for Your Thermal Camera Analyzer\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.worldoftest.com\/?utm_source=chatgpt.com\"\u003eQualitest North America\u003c\/a\u003e provides testing and measurement equipment for laboratories, quality control teams, engineers, and manufacturers, supported by technical assistance and calibration services. The QualiTCA™ thermal camera analyzer series is designed for consistent thermal measurement and detailed analysis across electronics, materials, and product testing applications.\u003c\/p\u003e\n\u003cp\u003eOur team can help you select the appropriate thermal camera analyzer based on your sample type, measurement requirements, applicable testing standards, and testing volume. From initial configuration and installation to ongoing technical support, Qualitest provides a complete solution for thermal imaging analysis.\u003c\/p\u003e\n\u003ch2\u003eRequest a Quote for a Thermal Camera Analyzer\u003c\/h2\u003e\n\u003cp\u003eWhether you need rapid PCB leakage detection, materials thermal analysis, or high-resolution IC failure analysis with power meter integration, Qualitest can help you select the appropriate QualiTCA™ model.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.worldoftest.com\/contact\/?utm_source=chatgpt.com\"\u003eContact the Qualitest team\u003c\/a\u003e for pricing, availability, and lead-time information.\u003c\/p\u003e","products":[{"product_id":"thermal-camera-analyzer-for-pcb","title":"Thermal Camera Analyzer for PCB","description":"\u003ch2\u003eThermal Camera Analyzer for PCB – QualiTCA™ 25A\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 25A Thermal Camera Analyzer for PCB is a PCB thermal imaging camera designed for circuit board repair, fault detection, and component-level thermal inspection. It helps technicians locate leakage currents, short circuits, and overheating components without physically probing the circuit board. The camera mounts on a foldable book-style stand that keeps the thermal sensor positioned over the PCB, leaving both hands free for soldering, testing, or component inspection.\u003c\/p\u003e\n\u003cp\u003eA 256×192 thermal sensor measures temperatures from -15°C to 600°C (5°F to 1112°F), making the QualiTCA™ 25A suitable for identifying small temperature variations, leakage points, hot spots, and abnormal component temperatures during PCB troubleshooting.\u003c\/p\u003e\n\u003ch2\u003eAdvanced PCB Thermal Analysis\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 25A connects to a PC or Android device through USB Type-C and supports dual software with standard and professional thermal analysis modes. Multiple measurement tools help technicians examine thermal patterns across different areas of a circuit board, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePoint temperature measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLine temperature measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSurface temperature measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3D thermal field analysis\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDouble board comparison\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOver-limit temperature alarms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe double board comparison function allows a known-good PCB to be compared with a suspected faulty board, making thermal differences easier to identify. An adjustable temperature alarm can also alert technicians when a measured temperature exceeds a preset limit.\u003c\/p\u003e\n\u003ch2\u003eMacro Thermal Inspection for Small Components\u003c\/h2\u003e\n\u003cp\u003eA detachable macro magnification lens provides a working distance of 30mm, allowing closer thermal inspection of small PCB components and localized hot spots. With the macro lens installed, measurement accuracy changes from ±2°C or 2% to ±5°C or 4%.\u003c\/p\u003e\n\u003cp\u003eThe compact foldable design measures 150 × 150 × 80mm when stored and 150 × 150 × 165mm during operation. With an operating temperature range of 0°C to 50°C and humidity tolerance of up to 95%, the QualiTCA™ 25A is well suited to electronics repair benches, PCB testing stations, and component-level troubleshooting environments.\u003c\/p\u003e\n\u003cp\u003eQualiTCA™ 25A PCB thermal camera analyzer combines high-resolution infrared imaging, hands-free inspection, macro thermal analysis, and PCB comparison tools for efficient circuit board fault detection.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer for PCB – QualiTCA™ 25A Applications\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 25A Thermal Camera Analyzer for PCB is designed to locate hidden thermal faults on powered, populated circuit boards without requiring immediate disassembly. Its infrared imaging and thermal measurement functions help technicians identify abnormal heat patterns, short circuits, overloaded components, and other PCB-related issues.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLeakage and Short-Circuit Detection: Locates components or circuit traces drawing excessive current on a powered PCB by identifying abnormal thermal patterns.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWater-Damage and Corrosion Repair: Helps locate shorted or overheating components on circuit boards affected by liquid exposure before further repair or disassembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSMT and Rework Quality Control: Checks repaired, replaced, or soldered components to verify that they reach expected operating temperatures after rework.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCircuit Board Thermal Design Validation: Evaluates the thermal behavior of a PCB under load to identify unexpected hot spots and verify the performance of its thermal design.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDouble Board Thermal Comparison: Compares a known-good reference PCB with a suspect board to highlight thermal differences and help isolate potentially faulty components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eElectronics Manufacturing Evaluation: Supports PCB testing, equipment evaluation, prototype verification, and thermal performance checks before circuit boards enter production.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThermal Camera Analyzer for PCB – QualiTCA™ 25A Key Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-29-1563059900.webp?v=1786347969\" alt=\"Thermal Camera Analyzer for PCB\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 25A Thermal Camera Analyzer for PCB combines one-click leakage and short-circuit detection with advanced thermal analysis tools for circuit board repair, troubleshooting, and component-level inspection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOne-Click Leakage and Short-Circuit Detection: Quickly identifies abnormal heat patterns associated with excessive current, helping narrow a PCB fault to a specific component or circuit trace.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e256×192 Thermal Resolution: Provides detailed infrared imaging for viewing individual components and identifying temperature differences across populated circuit boards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFixed-Focus, Stand-Mounted Design: Keeps the thermal camera positioned over the PCB while leaving both hands free for soldering, probing, testing, or component removal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFoldable Book-Style Housing: Folds to 150 × 150 × 80mm, making the PCB thermal analyzer convenient to store and move between electronics repair stations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDetachable Macro Magnification Lens: Reduces the working distance to 30mm for closer thermal inspection of small components, traces, and localized hot spots.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3D Thermal Field Analysis: Converts PCB temperature data into a three-dimensional height map, making unusual temperature patterns and thermal outliers easier to identify.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDouble Board Comparison: Displays a known-good PCB alongside a suspect board to highlight thermal differences and help isolate potentially faulty components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDual PC and Android Software: Supports standard and professional thermal analysis software for PC and Android devices, with automatic online software upgrades.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMultiple Temperature Measurement Modes: Provides point, line, surface, and full-field measurement options for detailed PCB thermal inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOver-Limit Temperature Alarm: Alerts technicians when a measured temperature exceeds a predefined threshold during circuit board testing and troubleshooting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eEvery powered component on a circuit board produces some heat as electrical energy is dissipated. When a component has a short circuit, leakage current, or another electrical fault, its temperature can rise above surrounding components. The QualiTCA™ 25A Thermal Camera Analyzer for PCB detects these thermal differences using a 256×192 microbolometer array designed for the long-wave infrared spectrum.\u003c\/p\u003e\n\u003cp\u003eThe sensor captures infrared radiation emitted by components, traces, and other areas of the circuit board and converts the detected energy into temperature data for each pixel. This information is presented as a detailed PCB thermal image, allowing technicians to identify abnormal heat patterns and potential fault locations without physically probing every component.\u003c\/p\u003e\n\u003ch3\u003eFixed-Focus Thermal Inspection\u003c\/h3\u003e\n\u003cp\u003eThe fixed focal-length optical system simplifies PCB inspection by providing accurate thermal readings at a working distance of 100mm to 150mm without manual focus adjustment. This range works well with the stand-mounted configuration and one-click leakage detection workflow.\u003c\/p\u003e\n\u003cp\u003eFor closer inspection, the detachable macro magnification lens reduces the working distance to approximately 30mm. This allows technicians to examine individual components, traces, and small thermal hot spots in greater detail. The macro lens increases magnification while reducing measurement accuracy compared with the standard optical configuration.\u003c\/p\u003e\n\u003ch3\u003eMulti-Mode PCB Thermal Analysis\u003c\/h3\u003e\n\u003cp\u003eThe QualiTCA™ 25A provides several thermal measurement methods for detailed circuit board analysis. Point measurement provides a temperature reading at a selected location, while line measurement displays temperature changes along a defined path. Surface measurement calculates temperature data across a selected region for broader thermal evaluation.\u003c\/p\u003e\n\u003cp\u003eThe 3D thermal field analysis function converts PCB temperature data into a height-map visualization, making temperature differences and abnormal thermal areas easier to recognize. For advanced circuit board troubleshooting, double board comparison places thermal data from a known-good PCB against a suspect board, helping technicians identify differences that may indicate a faulty component, trace, or circuit section.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer for PCB - QualiTCA™ 25A Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Resolution\u003c\/td\u003e\n\u003ctd\u003e256 × 192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Rate\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField of View\u003c\/td\u003e\n\u003ctd\u003e56° (H) × 42° (V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e-15°C to 600°C (5°F to 1112°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±2°C or 2% (without magnification lens), whichever is greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnification Lens\u003c\/td\u003e\n\u003ctd\u003eFixed snap-on type; ±5°C or 4% accuracy when installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Distance\u003c\/td\u003e\n\u003ctd\u003e100mm to 150mm (30mm with magnification lens)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize (Folded)\u003c\/td\u003e\n\u003ctd\u003e150 × 150 × 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize (Unfolded)\u003c\/td\u003e\n\u003ctd\u003e150 × 150 × 165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eUp to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration Software\u003c\/td\u003e\n\u003ctd\u003eStandard analysis software (Windows 10) and Android app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Functions\u003c\/td\u003e\n\u003ctd\u003eRapid leakage identification, high-temperature quick check, point\/line\/surface temperature measurement, 3D thermal field, local detailed temperature measurement, online temperature distribution, automatic software upgrade, double board comparison, over-limit temperature alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImage and Video Format\u003c\/td\u003e\n\u003ctd\u003eImage: JPG; Video: MP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":52807933395255,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-analyzer-pcb2094396453.webp?v=1786348026"},{"product_id":"benchtop-thermal-camera-analyzer","title":"Benchtop Thermal Camera Analyzer","description":"\u003ch2\u003eBenchtop Thermal Camera Analyzer – QualiTCA™ 25B\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 25B Benchtop Thermal Camera Analyzer is designed for electronics repair, PCB troubleshooting, thermal testing, and materials analysis. It combines the diagnostic capabilities of the QualiTCA™ 25A with advanced thermal data recording for heat sinks, heating elements, circuit boards, and material samples. Its 256×192 thermal sensor measures temperatures from -10°C to 550°C (14°F to 1022°F), supporting both electronics diagnostics and elevated-temperature testing.\u003c\/p\u003e\n\u003cp\u003eA multi-axis camera bracket with four adjustment knobs provides precise positioning without moving the main stand. The adjustable focal range supports a minimum observation distance of 20 mm and a recommended maximum distance of 1000 mm, allowing detailed component-level inspection as well as broader PCB and assembly analysis. Two boards can be connected on the base to create a larger testing surface for bigger assemblies.\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 25B also features an external USB temperature sensor for displaying ambient temperature alongside thermal measurements. Full-screen temperature video streaming with an 80 ms data recording interval provides smooth thermal playback and detailed temperature analysis during testing.\u003c\/p\u003e\n\u003cp\u003eThe included Professional Edition thermal analysis software supports Windows 10 and Windows 7 systems with an Intel i3 processor and at least 4 GB of memory. Automatic and manual internet update options help keep the software current. Adjustable emissivity from 0.1 to 1.0 allows temperature measurements to be calibrated for different surface materials and finishes.\u003c\/p\u003e\n\u003cp\u003eSampling rates can be configured from 1 to 20 frames per second, allowing users to balance thermal recording quality, playback smoothness, and file size. Optional accessories such as an atomizer test fixture, automatic heating test bench, and experiment box provide additional options for specialized thermal experiments and laboratory testing.\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 25B thermal camera analyzer is a versatile benchtop solution for PCB repair, electronic component inspection, heat transfer studies, thermal characterization, and materials testing.\u003c\/p\u003e\n\u003ch2\u003eBenchtop Thermal Camera Analyzer – QualiTCA™ 25B Applications\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 25B Benchtop Thermal Camera Analyzer extends circuit board troubleshooting into advanced thermal analysis for materials, heating elements, electronic components, and specialized testing applications. Its thermal imaging and temperature recording capabilities provide detailed insight into heat distribution, temperature changes, and thermal performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCircuit Board Repair and Leakage Detection: Identify potential short circuits and leakage points by analyzing the first, second, and third highest temperature readings across a circuit board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaterial Thermal Conductivity and Heat Dissipation Analysis: Compare the thermal performance of different heat-conducting and heat-dissipating materials by observing how each material distributes temperature under consistent testing conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeating Element and Heating Wire Testing: Measure heating rates, thermal performance, and temperature changes at different voltage and current levels for heating wires, heating sheets, and related heating components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE-Cigarette Atomizer Temperature Control Analysis: Monitor the heating rate and temperature of an atomizer during operation. Optional atomizer test fixtures are available for dedicated testing setups.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermal Quality and Aging Analysis: Compare a reference sample with a tested sample side by side to identify thermal differences and evaluate changes associated with component aging.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse Heating Detection: Record brief and intermittent temperature increases from circuit board components that may not be visible in a single thermal image, helping identify irregular thermal behavior.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eResearch and Development: Support thermal research and product development applications, including new material evaluation, LED inspection, mold inspection, and optical fiber welding analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenchtop Thermal Camera Analyzer – QualiTCA™ 25B Key Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-30-1637636566.webp?v=1786348237\" alt=\"Benchtop Thermal Camera Analyzer\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-31-309229713.webp?v=1786348236\" alt=\"Benchtop Thermal Camera Analyzer\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-32-568977497.webp?v=1786348236\" alt=\"Benchtop Thermal Camera Analyzer\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-33-1652940404.webp?v=1786348235\" alt=\"Benchtop Thermal Camera Analyzer\" style=\"font-size: 0.875rem;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-34-945150123.webp?v=1786348235\" alt=\"Benchtop Thermal Camera Analyzer\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-35-1684432884.webp?v=1786348234\" alt=\"Benchtop Thermal Camera Analyzer\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 25B Benchtop Thermal Camera Analyzer combines PCB troubleshooting capabilities with advanced thermal measurement, recording, and data analysis tools for electronics testing, materials research, and heating component evaluation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eComplete QualiTCA™ 25A Diagnostic Functions: Includes one-click leakage and short-circuit detection for faster circuit board troubleshooting and thermal fault identification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdjustable Emissivity from 0.1 to 1.0: Allows temperature readings to be adjusted according to the surface material being tested for more accurate thermal analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMulti-Axial Bracket with Four Adjustment Knobs: Provides flexible camera positioning in multiple directions, including up\/down, forward\/backward, and angled positioning for precise thermal imaging.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e20 mm to 1000 mm Observation Range: Supports detailed close-up inspection of individual components as well as wider thermal views of complete circuit boards and assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDouble Board Joining: Expands the available working area to 346 × 220 mm, providing additional space for larger circuit boards and assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfigurable Sampling Up to 20 FPS: Select sampling rates from 1 to 20 frames per second to balance recording file size with smooth playback of heating and cooling events.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRadiometric JPG and MP4 Recording: Stores thermal temperature information with captured images and recorded video, providing more data than a standard visual image.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermal Curves, Isotherms, and Excel Data Export: Converts thermal imaging results into measurable data for temperature trend analysis, comparison, documentation, and technical reporting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExternal Ambient Temperature Sensor: Displays ambient temperature alongside thermal measurements, providing additional environmental context during testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOptional Thermal Testing Accessories: Expand testing capabilities with optional accessories such as an atomizer test fixture, automatic heating test bench, and enclosed experiment box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eMaterials and electronic components above absolute zero emit infrared radiation related to their surface temperature. The QualiTCA™ 25B Benchtop Thermal Camera Analyzer detects this infrared energy with a 256×192 microbolometer array, converting thermal radiation into temperature information for detailed analysis of circuit boards, components, materials, and heating elements.\u003c\/p\u003e\n\u003cp\u003eDifferent surfaces emit infrared energy at different rates, which can affect temperature measurement accuracy. The QualiTCA™ 25B provides an adjustable emissivity range of 0.1 to 1.0, allowing users to configure the measurement according to the surface being tested. This correction helps produce more reliable temperature readings, particularly when testing materials with lower emissivity than a reference blackbody.\u003c\/p\u003e\n\u003cp\u003eThe manually focused lens supports an observation distance from 20 mm to a recommended maximum of 1000 mm. This range allows detailed inspection of individual electronic components at close distances while also supporting broader thermal views of circuit boards and complete assemblies. Two boards can be joined on the base to increase the available working area for larger circuit boards or thermal testing setups without repositioning the camera.\u003c\/p\u003e\n\u003cp\u003eThe thermal camera analyzer supports configurable sampling rates from 1 to 20 frames per second, allowing users to balance recording file size with smooth playback during heating and cooling tests. This capability is useful for tracking temperature changes over time and identifying short-duration thermal events.\u003c\/p\u003e\n\u003cp\u003eAdvanced analysis tools include point, line, polygon, and full-field temperature curves, along with isotherm visualization and Excel data export. These functions allow users to progress from a live thermal image to a measurable temperature data set for analysis, comparison, documentation, and technical reporting without requiring a separate data logger.\u003c\/p\u003e\n\u003ch2\u003eBenchtop Thermal Camera Analyzer - QualiTCA™ 25B Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Resolution\u003c\/td\u003e\n\u003ctd\u003e256 × 192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e8 to 14 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Rate\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNETD\u003c\/td\u003e\n\u003ctd\u003e70 mK @ 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField of View\u003c\/td\u003e\n\u003ctd\u003e42° (H) × 32.1° (V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eManual, adjustable from 20mm to 1000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e-10°C to 550°C (14°F to 1022°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±2°C or ±2% of reading, whichever is greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Measurement Method\u003c\/td\u003e\n\u003ctd\u003eMaximum, minimum, and average temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmissivity Correction\u003c\/td\u003e\n\u003ctd\u003eAdjustable within 0.1 to 1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Sampling Frequency\u003c\/td\u003e\n\u003ctd\u003eConfigurable: 20, 10, 5, or 1 frames per second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Board\u003c\/td\u003e\n\u003ctd\u003eOne board standard; joins to two boards for a larger area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotary Knobs\u003c\/td\u003e\n\u003ctd\u003e4 knobs: up\/down, lens slight adjust, lens forward\/back, lens slope adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Device\u003c\/td\u003e\n\u003ctd\u003eUSB temperature sensor (ambient temperature display)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Size (Single)\u003c\/td\u003e\n\u003ctd\u003e220 × 172 mm, 241mm height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Size (Double)\u003c\/td\u003e\n\u003ctd\u003e346 × 220 mm, 341mm height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e-10°C to 50°C (14°F to 122°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Humidity\u003c\/td\u003e\n\u003ctd\u003eUp to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration Software\u003c\/td\u003e\n\u003ctd\u003eProfessional Edition Analysis Software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComputer Requirements\u003c\/td\u003e\n\u003ctd\u003eWindows 10 (recommended) or Windows 7, Intel i3 or better, 4GB RAM or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Upgrade\u003c\/td\u003e\n\u003ctd\u003eAutomatic or manual, via internet connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Features\u003c\/td\u003e\n\u003ctd\u003eCurves, isotherms, real-time and offline video analysis, point\/line\/polygon temperature measurement, temperature alarm, three video recording methods, EXCEL data recording, dynamic and fixed range, synchronous ambient temperature display, 3D temperature field, adjustable emissivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImage File\u003c\/td\u003e\n\u003ctd\u003eFull-temperature JPG thermogram (radiometric JPG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo File\u003c\/td\u003e\n\u003ctd\u003eMP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":52807975928119,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/benchtop-thermal-camera-analyzer1331581198.webp?v=1786348376"},{"product_id":"thermal-camera-analyzer-advanced","title":"Thermal Camera Analyzer (Advanced)","description":"\u003ch2\u003eThermal Camera Analyzer (Advanced) – QualiTCA™ 38\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 38 Thermal Camera Analyzer (Advanced) is a high-resolution thermal imaging system designed for IC inspection, fiber analysis, micro-component testing, and fine material analysis. Its 384×288 thermal sensor works with a quick-change macro lens to resolve targets as small as 25 microns, providing detailed thermal views of individual IC pins, bond wires, and other miniature components. With a temperature measurement range of -20°C to 550°C (-4°F to 1022°F), the system supports both ambient thermal studies and high-temperature component failure analysis. A stable, multi-angle adjustable frame helps maintain consistent camera positioning for repeatable measurements.\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 38 can connect simultaneously to an ambient temperature sensor and load power meter, allowing voltage, current, and temperature data to be analyzed along the same timeline. Measurement accuracy is rated at ±2°C or 2% from -20°C to 120°C, with accuracy of ±3% above 120°C. Independent emissivity settings from 0.1 to 1.0 allow accurate thermal measurements across different materials within the same image. A built-in DDE image enhancement algorithm improves thermal image clarity, making small details easier to identify during electronic and material inspections.\u003c\/p\u003e\n\u003cp\u003eThe included Professional Edition software supports full radiometric video recording in the proprietary DYV format, along with standard JPG and MP4 exports. Temperature data can be retrieved from individual frames after recording, allowing detailed analysis even after the test has ended. The software provides temperature curves, isotherms, point measurements, line measurements, and polygon measurements for evaluating thermal patterns across a sample. With an operating temperature range of -10°C to 55°C, the QualiTCA™ 38 is suited to laboratory benches, electronics workstations, research environments, and professional thermal analysis applications.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer (Advanced) – QualiTCA™ 38 Applications\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 38 Thermal Camera Analyzer (Advanced) delivers high-resolution thermal analysis for electronics testing, material research, component development, and failure analysis where fine thermal details require greater imaging capability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIC and Circuit Board Failure Analysis: Identifies overheating components and evaluates how heat from a high-temperature chip spreads to nearby components across the circuit board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFine Material and Bond Wire Inspection: Uses the macro lens to resolve gold bond wires and other small targets down to 25 microns, supporting detailed inspection of miniature electronic structures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermally Conductive Material Testing: Monitors heat transfer through thermal interface materials, conductive materials, and heat sink components over time to evaluate thermal performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeating Element Characterization: Measures heating rate, temperature, and thermal performance of heating wires, heating films, and similar elements under different voltage and current conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE-Cigarette Atomizer Temperature Analysis: Records the heating rate and temperature changes of an atomizer during controlled testing and performance evaluation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct and Component Quality Control: Monitors maximum, minimum, and average temperatures during automated production processes to identify abnormal temperature conditions and potential overheating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse Heating Detection: Captures short-duration thermal events from circuit board components, helping identify intermittent heat pulses that may not appear in a conventional still thermal image.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThermal Camera Analyzer (Advanced) – QualiTCA™ 38 Key Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-36-1434010610.webp?v=1786348605\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-37-1998467090.webp?v=1786348605\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-38-872046321.webp?v=1786348604\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-39-1426821453.webp?v=1786348603\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-40-1992115274.webp?v=1786348602\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-41-161282849.webp?v=1786348600\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-42-198918176.webp?v=1786348599\" alt=\"Thermal Camera Analyzer (Advanced)\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 38 Thermal Camera Analyzer (Advanced) combines high-resolution thermal imaging, micron-scale inspection, and multi-sensor data correlation for electronics research, component testing, material analysis, and thermal failure analysis.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e384×288 Thermal Resolution with 1.3 mrad IFOV: Captures fine thermal details with greater clarity, helping identify small temperature variations that lower-resolution thermal cameras may overlook.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuick-Change Macro Lens for 25-Micron Inspection: Switches between wider thermal views and close-up inspection of targets as small as 25 microns, making it suitable for bond wire, IC, and miniature component analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower Meter and Temperature Sensor Integration: Correlates voltage, current, ambient temperature, and thermal data on a single timeline for detailed test analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiered Measurement Accuracy to 550°C: Provides accuracy of ±2°C or 2% up to 120°C and ±3% above 120°C, supporting reliable measurements across the full temperature range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndependent Area Emissivity from 0.1 to 1.0: Allows separate emissivity adjustments for different regions within the same thermal image, improving measurement accuracy across mixed materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull Radiometric DYV Video Recording: Records temperature information for every frame, allowing users to review and analyze thermal data after testing rather than relying only on captured still images.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDE Image Enhancement Algorithm: Improves displayed thermal image sharpness and enhances the visibility of fine structural details during close-range inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMulti-Angle Adjustable Frame: Provides stable camera positioning at different viewing angles, helping maintain consistent setup conditions for repeatable thermal measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermal Curves, Isotherms, and Excel Data Export: Converts thermal measurements into quantifiable data for analysis, documentation, reporting, and further evaluation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMultiple Thermal Analysis Modes: Provides dedicated analysis options for IC and circuit board inspection, atomizer testing, multi-dimensional analysis, material thermal capacity evaluation, and defect detection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eMaterials and electronic components above absolute zero emit infrared radiation according to their temperature. The QualiTCA™ 38 Thermal Camera Analyzer detects this infrared energy using a 384×288 microbolometer array with a 1.3 mrad instantaneous field of view (IFOV). This angular resolution, combined with the quick-change macro lens, allows the thermal imaging system to resolve targets as small as 25 microns, making it suitable for detailed inspection of bond wires, IC pins, miniature components, and fine material structures.\u003c\/p\u003e\n\u003cp\u003eA proprietary digital detail enhancement (DDE) algorithm improves the displayed thermal image, helping reveal fine structures that can be difficult to distinguish during close-range inspection. The macro lens provides detailed imaging at a short working distance, while independent area emissivity settings from 0.1 to 1.0 allow different regions within the same thermal image to be adjusted according to their material properties. This supports more accurate temperature analysis when multiple materials appear within a single frame.\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 38 provides measurement accuracy of ±2°C or 2% up to 120°C, with accuracy of ±3% above 120°C, across its measurement range. Integration with a load power meter allows voltage, current, and temperature data to be plotted on the same timeline. This makes it possible to compare changes in electrical load with corresponding temperature changes, helping identify when a component begins to heat during a test.\u003c\/p\u003e\n\u003cp\u003eFull radiometric video recording in DYV format preserves temperature information for every recorded frame. This allows users to review thermal events after testing and correlate temperature changes with electrical measurements throughout the complete test sequence. By combining high-resolution thermal imaging, power data integration, emissivity adjustment, and radiometric recording, the QualiTCA™ 38 supports repeatable and quantified thermal analysis, electronics testing, component failure analysis, and material research.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer (Advanced) - QualiTCA™ 38 Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Resolution\u003c\/td\u003e\n\u003ctd\u003e384 × 288\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e8 to 14 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNETD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;50 mK @ 25°C, f\/1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField of View\u003c\/td\u003e\n\u003ctd\u003e29.2° (H) × 21.7° (V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIFOV\u003c\/td\u003e\n\u003ctd\u003e1.3 mrad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Rate\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e-20°C to 550°C (-4°F to 1022°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±2°C or 2% from -20°C to 120°C; ±3°C or 3% from 120°C to 550°C, whichever is greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Measurement Method\u003c\/td\u003e\n\u003ctd\u003eMaximum, minimum, and average temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptimal Measurement Distance\u003c\/td\u003e\n\u003ctd\u003e40mm to 2000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMacro Lens\u003c\/td\u003e\n\u003ctd\u003e50mm to 80mm, resolves targets to 25 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Correction\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeparate Area Emissivity\u003c\/td\u003e\n\u003ctd\u003eAdjustable within 0.1 to 1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImage File\u003c\/td\u003e\n\u003ctd\u003eFull radiometric JPG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo File\u003c\/td\u003e\n\u003ctd\u003eMP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull Radiometric Video File\u003c\/td\u003e\n\u003ctd\u003edyv format (opened with CA software)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e-10°C to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Devices\u003c\/td\u003e\n\u003ctd\u003eUSB temperature sensor, USB power meter (other power meters customizable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Features\u003c\/td\u003e\n\u003ctd\u003eCurves, isotherms, real-time and offline video analysis, point\/line\/polygon temperature measurement, online multi-point temperature data, temperature alarm, three video recording modes, EXCEL data recording, dynamic and fixed range, separate area emissivity, power meter connection support, macro lens replacement, full radiometric temperature video recording\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalysis Modes\u003c\/td\u003e\n\u003ctd\u003eIC and circuit board, e-cigarette atomizer, multi-dimensional, material thermal capacity, defect analysis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":52808055226679,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-analyzer-advanced1463471387.webp?v=1786348762"},{"product_id":"thermal-camera-analyzer-rnd","title":"Thermal Camera Analyzer (RnD)","description":"\u003ch2\u003eThermal Camera Analyzer (R\u0026amp;D) – QualiTCA™ 64\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 64 Thermal Camera Analyzer (R\u0026amp;D) is a research-grade thermal imaging system designed for laboratories requiring high-resolution temperature measurement and detailed thermal analysis. Its 640×512 thermal sensor works with a quick-change macro lens for close inspection of integrated circuits, fibers, microcomponents, and other fine materials. With a temperature measurement range of -20°C to 550°C (-4°F to 1022°F), the system supports ambient material studies as well as high-temperature component and failure analysis. A stable, multi-angle adjustable frame helps maintain consistent camera positioning for repeatable measurements.\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 64 provides continuous real-time thermal monitoring for up to 24 hours, making it suitable for extended reliability testing, thermal aging studies, and overnight experiments. The analyzer can simultaneously connect to an ambient temperature sensor and load power meter, allowing voltage, current, and temperature data to be correlated on a shared timeline. Measurement accuracy is rated at ±2°C or 2% from -20°C to 120°C, with accuracy of ±3% above 120°C. Its DDE image-processing algorithm enhances thermal image clarity, helping researchers identify fine temperature variations and small thermal features.\u003c\/p\u003e\n\u003cp\u003eThe included Professional Edition software records full radiometric thermal video in proprietary DYV format and supports standard JPG and MP4 output. Researchers can retrieve temperature measurements from individual frames after a test has finished, supporting detailed post-test thermal analysis. Independent emissivity settings from 0.1 to 1.0 allow different materials within the same thermal image to be measured with appropriate emissivity values. With an operating environment of -10°C to 55°C, the QualiTCA™ 64 is well suited for laboratory benches, research facilities, and technical workshops.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer (R\u0026amp;D) – QualiTCA™ 64 Applications\u003c\/h2\u003e\n\u003cp\u003eThe QualiTCA™ 64 Thermal Camera Analyzer (R\u0026amp;D) supports high-resolution thermal imaging and temperature measurement for research, product development, materials testing, and electronic component analysis. Its 640×512 thermal sensor, macro lens compatibility, and long-duration recording capabilities make it suitable for detailed thermal studies across a range of applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIC and Circuit Board Failure Analysis: Identify overheating or failing components and evaluate how heat from a hot chip spreads to neighboring components across a circuit board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFine Material and Bond Wire Inspection: Examine small targets on integrated circuits, bond wires, fibers, and other fine materials using the macro lens for detailed thermal inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLong-Duration Reliability Testing: Record continuous thermal video for up to 24 hours to monitor temperature changes, heat dissipation, thermal stability, and aging behavior over extended test periods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermally Conductive Material Testing: Analyze heat transfer through thermally conductive materials, heat sinks, and related components under controlled test conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeating Element Characterization: Measure heating rate, temperature distribution, and thermal performance of heating wires, films, and similar elements under different voltage and current conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE-Cigarette Atomizer Temperature Analysis: Monitor atomizer heating behavior, temperature changes, and heat-up rates during controlled testing and performance evaluation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct and Component Quality Control: Monitor maximum, minimum, and average temperatures during automated production or testing processes to identify abnormal heating and over-temperature conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThermal Camera Analyzer (R\u0026amp;D) – QualiTCA™ 64 Key Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-43-1848194038.webp?v=1786348928\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-44-45791888.webp?v=1786348928\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-45-1877896064.webp?v=1786348926\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-46-1554363615.webp?v=1786348925\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-47-189545755.webp?v=1786348925\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-48-774091685.webp?v=1786348924\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-49-206319966.webp?v=1786348923\" alt=\"Thermal Camera Analyzer (RnD)\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe QualiTCA™ 64 Thermal Camera Analyzer (R\u0026amp;D) combines high-resolution thermal imaging with extended monitoring and advanced measurement capabilities for laboratory research, electronics testing, materials analysis, and thermal performance studies.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e640×512 Thermal Resolution with 1.3 mrad IFOV: Captures fine thermal details with higher resolution than the QualiTCA™ 38, making it suitable for small, closely spaced, and densely packed targets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e24-Hour Continuous Monitoring: Supports unattended thermal recording for extended reliability tests, aging studies, heat dissipation analysis, and overnight experiments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuick-Change Macro Lens: Switches between wider thermal views and close-up inspection of integrated circuits, fibers, bond wires, and fine material samples.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower Meter and Temperature Sensor Integration: Correlates voltage, current, ambient temperature, and thermal measurements on a shared timeline for comprehensive test analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiered Accuracy to 550°C: Provides accuracy of ±2°C or 2% from -20°C to 120°C and ±3% above 120°C, supporting reliable measurements across the full temperature range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSeparate Area Emissivity Settings from 0.1 to 1.0: Allows individual regions within a thermal image to use different emissivity values when analyzing multiple materials in the same frame.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull Radiometric DYV Video Recording: Stores temperature data for every recorded frame, allowing detailed thermal measurements and analysis after the test is complete.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDDE Image Enhancement Algorithm: Improves displayed thermal image sharpness to make small temperature patterns and fine thermal features easier to identify.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMulti-Angle Adjustable Frame: Provides stable camera positioning for different laboratory setups and helps maintain consistent measurement conditions between experiments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMultiple Thermal Analysis Modes: Supports dedicated analysis workflows for IC and circuit board testing, atomizer temperature analysis, multidimensional thermal analysis, material thermal capacity studies, and defect detection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTheory and Method\u003c\/h2\u003e\n\u003cp\u003eEvery material and electronic component above absolute zero emits infrared energy related to its temperature. The QualiTCA™ 64 Thermal Camera Analyzer detects this infrared radiation with a 640×512 microbolometer array and a 1.3 mrad instantaneous field of view (IFOV). The combination of high thermal resolution and fine angular resolution helps the analyzer capture small targets and provide detailed temperature measurements across multiple regions within a single thermal image.\u003c\/p\u003e\n\u003cp\u003eA proprietary digital detail enhancement (DDE) algorithm improves the displayed thermal image before measurement adjustments are made, helping reveal fine features when working at the close distances associated with the macro lens. Because different materials have different infrared emissivity characteristics, the QualiTCA™ 64 provides independent area emissivity settings from 0.1 to 1.0. This allows different regions of the same thermal image to receive individual emissivity corrections. Measurement accuracy is ±2°C or 2% up to 120°C, with accuracy of ±3% above 120°C.\u003c\/p\u003e\n\u003cp\u003eThe analyzer can connect to a load power meter while simultaneously monitoring thermal data, allowing voltage, current, and temperature measurements to appear on a shared timeline. This makes it easier to identify relationships between changes in electrical load and component temperature. For extended testing, the QualiTCA™ 64 can record continuously for up to 24 hours in full radiometric DYV format, preserving temperature data throughout the complete test period for detailed post-test analysis and thermal performance evaluation.\u003c\/p\u003e\n\u003ch2\u003eThermal Camera Analyzer (RnD) - QualiTCA™ 64 Technical Specifications\u003c\/h2\u003e\n\u003ctable class=\"table\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Resolution\u003c\/td\u003e\n\u003ctd\u003e640 × 512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e8 to 14 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNETD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;50 mK @ 25°C, f\/1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField of View\u003c\/td\u003e\n\u003ctd\u003e48.7° (H) × 38.6° (V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIFOV\u003c\/td\u003e\n\u003ctd\u003e1.3 mrad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Rate\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e-20°C to 550°C (-4°F to 1022°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±2°C or 2% from -20°C to 120°C; ±3°C or 3% from 120°C to 550°C, whichever is greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Measurement Method\u003c\/td\u003e\n\u003ctd\u003eMaximum, minimum, and average temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptimal Measurement Distance\u003c\/td\u003e\n\u003ctd\u003e40mm to 2000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMacro Lens\u003c\/td\u003e\n\u003ctd\u003e60mm to 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Correction\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeparate Area Emissivity\u003c\/td\u003e\n\u003ctd\u003eAdjustable within 0.1 to 1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Monitoring\u003c\/td\u003e\n\u003ctd\u003eUp to 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImage File\u003c\/td\u003e\n\u003ctd\u003eFull radiometric JPG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo File\u003c\/td\u003e\n\u003ctd\u003eMP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull Radiometric Video File\u003c\/td\u003e\n\u003ctd\u003edyv format (opened with CA software)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e-10°C to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Devices\u003c\/td\u003e\n\u003ctd\u003eUSB temperature sensor, USB power meter (other power meters customizable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Features\u003c\/td\u003e\n\u003ctd\u003eCurves, isotherms, real-time and offline video analysis, point\/line\/polygon temperature measurement, online multi-point temperature data, temperature alarm, three video recording modes, EXCEL data recording, dynamic and fixed range, separate area emissivity, power meter connection support, macro lens replacement, full radiometric temperature video recording\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalysis Modes\u003c\/td\u003e\n\u003ctd\u003eIC and circuit board, e-cigarette atomizer, multi-dimensional, material thermal capacity, defect analysis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Qualitest USA LC","offers":[{"title":"Default Title","offer_id":52808176632119,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/files\/thermal-camera-analyzer-rnd155366738.webp?v=1786349041"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/1859\/1543\/collections\/thermal-camera-analyzers217080253.webp?v=1786347831","url":"https:\/\/qualitest.us\/es\/collections\/thermal-camera-analyzers.oembed","provider":"Qualitest USA LC","version":"1.0","type":"link"}